A. No. Kitchen ventilation fans located on a range hood are considered to be part of the appliance. The Fair Housing Act has no requirements for appliances in the interiors of...
Search Results "Side Reach"
-
22.1 Q. Must the switches on range hood kitchen ventilation fans be in accessible locations?
-
b. Transfer Surface Location
The MDE NPRM proposed the same location and transfer sides of the transfer surface for diagnostic equipment used by patients in the supine, prone, or side-lying position (M301) and diagnostic...
-
Side Entry Openings, and Width and Length of Wheelchair Space
Side Entry Openings, and Width and Length of Wheelchair Space If the wheelchair space can only be entered from the side, the ride must be designed to permit sufficient turning space for...
-
Transfer Sides (M301.2.3 and M302.2.3)
M301.2.3 and M302.2.3 would require the transfer surface to be located so as to provide patients who use mobility devices the option to transfer onto the short side and the long side of...
-
604.5.1 Side Wall
604.5.1 Side Wall....
-
H4
On the pull side of the door, is there at least 18 inches clearance provided on the latch side if the door is not automatic or power-operated?...
-
g-iii
Is there clear maneuvering floor space in front of each accessible door (see ADA Standards § Fig. 25) and, on the pull side, is there at least 18 inches clear floor space beyond the latch...
-
407.12.3.2.2 Knee and Toe Space (Section-by-Section Analysis)
407.12.3.2.2 Knee and Toe Space (Section-by-Section Analysis) This section proposes dimensions for knee and toe space under ICT when an obstructed forward reach is provided....
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308....
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308....
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308. ...
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall. ...
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308....
-
11B-309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in Section 11B-308....
-
R403.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in R406....
-
11B-309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in Section 11B-308....
-
11B-309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in Section 11B-308....
-
M4
On the latch, pull side of the door, is there at least 18 inches clearance provided if the door is not automatic or power operated?...
-
Curb Ramps
Error/Omission: Curb ramp that is located across a circulation path has steep unprotected side flares. Result: People walking across the curb ramp may trip and be injured....
-
5.3.2.2 Transfer Sides for Imaging Equipment
5.3.2.2 Transfer Sides for Imaging Equipment. The transfer surface should be provided on at least one long side of the table....