Accessible routes serving teeing grounds, practice teeing grounds, putting greens, practice putting greens, teeing stations at driving ranges, course weather shelters, golf car rental areas...
Search Results "Maximum Extent Practicable"
-
11B-1006.2 Accessible routes
-
F104.1.1 Construction and Manufacturing Tolerances
It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
11B-202.3 Alterations
Any elements or spaces of the building or facility that are required to comply with these requirements must be made accessible within the scope of the alteration, to the maximum extent feasible...
-
Alterations
If compliance is technically infeasible, the alteration must comply to the maximum extent feasible....
-
104.1.1 Construction and Manufacturing Tolerances
It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
104.1.1 Construction and Manufacturing Tolerances
It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
§100.400 Prohibited interference, coercion or intimidation.
[54 FR 3283, Jan. 23, 1989, as amended at 81 FR 63075, Sept. 14, 2016]
-
§100.90 Discrimination in the provision of brokerage services.
[54 FR 3283, Jan. 23, 1989, as amended at 81 FR 63074, Sept. 14, 2016]
-
§100.7(a) Direct liability
(a) Direct liability.
-
1.2.2
1.2.2 Use datum dimensioning referenced to a primary or secondary control point on the construction site when the position of one item is particularly important. Do not dimension it...
-
1 - Design and drawing
1 - Design and drawing Current practice It is typical practice for architects to use the values published in guidelines and standards and repeat the values on the drawings....
-
§ 35.151(b) Alteration
(b) Alteration.
-
§ 35.151(b) Alterations.
(b) Alterations.
-
§ 37.43 Alteration of transportation facilities by public entities
[See subsections ...]
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum," it would not be good practice to specify "5 pounds (...
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum," it would not be good practice to specify "5 pounds (...
-
§ 36.302 Modifications in policies, practices, or procedures
Amend § 36.302 by adding paragraph (g) to read as follows: § 36.302 Modifications in policies, practices, or procedures....
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum", it would not be good practice to specify "5 pounds (...
-
Section 35.151(b) Alterations (Section-by-Section Analysis)
of public accommodation or commercial facility that affects or could affect the usability of or access to an area that contains a primary function, the entity shall ensure that, to the maximum...
-
Section 36.403 Alterations: Path of Travel (Section-By-Section Analysis and Response to Comments)
requirement that any alteration that affects or could affect the usability of or access to an area of a facility that contains a primary function shall be made so as to ensure that, to the maximum...
-
308.3.2 Obstructed High Reach
and the depth of the obstruction shall be 24 inches (610 mm) maximum....
-
Alterations to Qualified Historic Facilities [§202.5]
Alterations to qualified historic facilities must comply with section 202.5 to the maximum extent feasible....
-
I. BACKGROUND AND JURISDICTION
. §12188(b)(1)(B) to bring a civil action in federal court if there is reasonable cause to believe that any person is engaged in a pattern or practice of discrimination in violation of the...
-
Section 36.302 Modifications in Policies, Practices, or Procedures (Section-by-Section Analysis)
Section 36.302 Modifications in Policies, Practices, or Procedures (Section-by-Section Analysis)...