Search Results "Licensing Exam"

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.4 Leg Supports

  Leg supports shall provide a method of supporting, positioning, and securing the patient’s legs.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M301.2 Transfer Surface

  A transfer surface shall be provided and shall comply with M301.2.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M301.2.3 Size

  The size of the transfer surface shall comply with M301.2.3.1 or M301.2.3.2. The size of transfer surfaces shall be measured from center points of their opposing sides.

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M301.2.3 Size (Section-by-Section Analysis)

  The MDE NPRM proposed a transfer surface size for diagnostic equipment used in the supine, prone, or side-lying position of 30 inches wide and 15 inches deep minimum. (proposed...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2.1 Transfer Surface Size Recommendations for M301

  5.2.1 Transfer Surface Size Recommendations for M301 Description: The transfer surface is the part of the diagnostic equipment onto which patients who use mobility devices or aids...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2.1.1 Transfer Surface Width

  5.2.1.1 Transfer Surface Width. The transfer surface should be 28 inches wide minimum for equipment used by patients in a supine, side-lying, or prone position.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2 Transfer Surface Size for Equipment Used by Patients in Supine, Prone, or Side-Lying Position

  5.2 Transfer Surface Size for Equipment Used by Patients in Supine, Prone, or Side-Lying Position.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2.1 Transfer Surface Size

  5.2.1 Transfer Surface Size

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2.1.2 Transfer Surface Depth

  5.2.1.2 Transfer Surface Depth. The transfer surface should be 17 inches deep minimum for all equipment used by patients in a supine, side-lying, or prone position with the exception...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2.1.1 Transfer Surface Width Recommendations for M301

  5.2.1.1 Transfer Surface Width Recommendations for M301 The Committee recommends a transfer surface of 28 inches minimum width for equipment used by patients in a supine,...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2 Transfer Surface Size Recommendations

  5.2 Transfer Surface Size Recommendations

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M301.2.2 Size

  The transfer surface shall be 30 inches (760 mm) wide minimum and 15 inches (381mm) deep minimum. Advisory M301.2.2 Size. The size requirements in this section apply only to the...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M301.2 Transfer Surface

  A transfer surface shall be provided and shall comply with M301.2.

• State and Local Documents > State Technical Assistance > California Department of Managed Health Care - Physical Access to Health Care Fact Sheet
  California Department of Managed Health Care - Physical Access to Health Care Fact Sheet

  If You Use a Wheelchair or Have a Hard Time Walking

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M301.3.2 Leg Supports

  Where stirrups are provided, leg supports shall also be provided and shall comply with M305.4.

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M301.3.2 Leg Supports (Section-by-Section Analysis)

  In the MDE NPRM, the Access Board proposed to place the requirements for stirrups on diagnostic equipment used by patients in the supine, prone, or side-lying position in M301. In...

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.4 Leg Supports (Section-by-Section Analysis)

  As discussed above in Section V.C.3.b (Section-by-Section Analysis – M301.3.2) and Section V.C.7.b (Section-by-Section Analysis – M302.3.2), the technical requirements for leg...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M301.3.2 Stirrups

  Where stirrups are provided, they shall provide a method of supporting, positioning, and securing the patient’s legs.

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-805.4.3 Turning space

  of each side and the foot of the exam table. ...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1.4 Transfer Surface Height Measurement for M301 and M302

  This recommendation applies to exam tables and chairs and this measurement may not necessarily be at the centerline of the seat where there are higher points on the seat....

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-805.4.3 Turning space

  side and the foot of the exam table....

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-805.4.3 Turning space

  side and the foot of the exam table. ...

• Federal Documents > Technical Assistance > Title I Technical Assistance Manual
  Risk Cannot be Speculative or Remote

  Risk Cannot be Speculative or Remote The results of a medical examination may not disqualify persons currently able to perform essential job functions because of unsubstantiated...

• Federal Documents > Technical Assistance > Title I Technical Assistance Manual
  1630.13(a)

  (a) Pre-employment examination or inquiry. Except as permitted by section 1630.14, it is unlawful for a covered entity to conduct a medical examination of an applicant or to make...