Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
Search Results "End-Opening Door"
Commonly Searched Documents
- 
    
  
  11B-404.2.7 Door and gate hardware
  
 - 
    
  
  11B-407.3.1 Type
  
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
 - Yale 1900 Series Traditional Door Closers
 - TownSteel TDC 90 ALUMINUM Grade 1 Door Closer
 - 
    
  
  410.6 Doors and Gates
  
Platform lifts shall have low-energy power-operated doors or gates complying with 404.3. Doors shall remain open for 20 seconds minimum....
 - SafeZone: Norton SafeZone Overview
 - 
    
  
  410.6 Doors and Gates
  
410.6 Doors and Gates. Platform lifts shall have low-energy power-operated doors or gates complying with 404.3. Doors shall remain open for 20 seconds minimum....
 - Allegion LCN 1260 Series Surface Mounted Door Control
 - Corbin Russwin Inc. DC3000 Series Cast Iron Door Closer
 - TownSteel TDC 85 ALUMINUM Grade 1 Door Closer
 - Sargent 351 Series Aluminum Door Closer
 - TownSteel TDC 70 ALUMINUM Grade 1 Door Closer
 - 
    
  
  Automatic Door Break Out Openings
  
Automatic Door Break Out Openings. The 1991 Standards do not contain any technical requirement for automatic door break out openings....
 - Cal-Royal CR801 Series Hydraulic Door Closers
 - 
    
  
  Openings in Beach Access Routes
  
Openings are gaps in the surface of a beach access route. Gaps include spaces between the planks on a boardwalk and drainage holes in temporary or permanent surfaces....
 - Sargent 281 Series Cast Iron Door Closer
 - Yale 5800 Series Cast Iron Door Closer
 - TownSteel TDC 40, CAST IRON Grade 1 Door Closer
 - Corbin Russwin Inc. DC6000 Series Cast Iron Door Closer
 - 
    
  
  Automatic Doors
  
Provisions in section 404.3 address clear width; maneuvering clearance; thresholds; doors and gates in series; operable parts; break out opening; and revolving doors, gates, and turnstiles...
 - 
    
  
  11B-404.2.10 Door and gate surfaces
  
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
 - 
    
  
  11B-410.6 Doors and gates
  
Platform lifts shall have low-energy power-operated doors or gates complying with Section 11B-404.3. Doors shall remain open for 20 seconds minimum....
 - 
    
  
  11B-410.6 Doors and gates
  
Platform lifts shall have low-energy power-operated doors or gates complying with Section 11B-404.3. Doors shall remain open for 20 seconds minimum....
 - Yale 2700 Series Architectural Door Closer