Raised crossings, where provided, eliminate the need for curb ramps while serving to reduce traffic speeds....
Search Results "Cross Slope"
2010 ADA Definition
Cross Slope: The slope that is perpendicular to the direction of travel (see running slope).
Filters
Commonly Searched Documents
-
Raised Crossings
-
Do accessible routes that cross vehicular ways need to be marked as a crossing?
No, accessible routes that cross vehicular ways are not required by the Standards to be marked as a crossing....
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
Sloped Entries
Sloped Entries Sloped entries must comply with ADAAG accessible route provisions (36 inch minimum width, maximum 1:12 or 8.33% slope), except that the surface does not need to be slip...
-
A4.5.1 General
Cross slopes on walks and ground or floor surfaces can cause considerable difficulty in propelling a wheelchair in a straight line....
-
810.10 Track Crossings
Where a circulation path serving boarding platforms crosses tracks, it shall comply with 402....
-
Table 2: Summary of Department of Transportation Survey
slope)-Concrete 0 5% 0.57% +0.5% 2 Roadway grade cross slope (running grade)-Concrete 0 5% 0.60% +0.5% 3 Sidewalk running...
-
Running Slope
Running Slope—The ascent or descent of a trail segment expressed as a percentage of its length....
-
1.1.13 Flatness of ramp running slope
1.1.13 Flatness of ramp running slope....
-
7.4.4.3 Slope
The slope of a resting interval shall not exceed 1:20 (5 percent) in any direction....
-
11B-810.10 Track crossings
Where a circulation path serving boarding platforms crosses tracks, it shall comply with Section 11B-402....
-
4.6.5 Slope
The slope of the clear floor or ground space required by section 4.6.4 shall not exceed 1:48 (2 percent) in any direction. Exception....
-
609.2.2 Non-Circular Cross Section
609.2.2 Non-Circular Cross Section....
-
1018.10 Dune Crossings
This section requires handrails complying with 505 of the Architectural Barriers Act Accessibility Guidelines and curbs or barriers to be provided where the slope of a beach access route...
-
R409.7.2 Non-Circular Cross Sections
R409.7.2 Non-Circular Cross Sections....
-
609.2.2 Non-Circular Cross Section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches (120 mm)...
-
Significant alternatives which minimize any significant economic impacts on small entities
Maximum cross slope of 2 percent required on pedestrian access routes, including within pedestrian street crossings with yield or stop control....
-
Q5.) What dimensions and conditions can practitioners reasonably consider to be compliant when the conditions, as constructed, do not meet the technical requirements exactly and there are no official, published, industry-developed tolerances?
Sloped concrete and asphalt surfaces are an excellent example of this problem. ...
-
11B-810.10 Track crossings
Where a circulation path serving boarding platforms crosses tracks, it shall comply with Section 11B-402....
-
11B-810.10 Track crossings
Where a circulation path serving boarding platforms crosses tracks, it shall comply with Section 11B-402....
-
5.1.3 Slope
The slope of the surface of the clear floor or ground space inside the camp shelter shall not be steeper than 1:48 (2 percent) in all directions....
-
609.2.2 Non-Circular Cross Section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches (120 mm)...
-
609.2.2 Non-Circular Cross Section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches (120 mm)...