Doors shall comply with the following: Doors shall not be less than 6 feet 8 inches (2032 mm) in height. ...
Search Results "Automatic Door"
Filters
Commonly Searched Documents
-
1132A.3 Width and height of interior doors and secondary exterior doors
-
4.13.6 MANEUVERING CLEARANCES AT DOORS
Minimum maneuvering clearances at doors that are not automatic or power-assisted shall be as shown in Fig. 25....
-
4.13.6 Maneuvering Clearances at Doors
Minimum maneuvering clearances at doors that are not automatic or power-assisted shall be as shown in Fig. 25....
-
BEA Inc. Magic Switch Hardwired Touchless Sensor Door Opener MS21H (Wave to Open)
The MS21 is a state-of-the-art touchless activation plate that utilizes capacitance technology to detect and trigger activation in automatic doors....
-
A4.13.11(1) Hinged doors
(1) Hinged doors: Force applied perpendicular to the door at the door opener or 30 in (760 mm) from the hinged side, whichever is farther from the hinge....
-
A4.13.11(1) Hinged doors
(1) Hinged doors: Forced applied perpendicular to the door at the door opener or 30 in (760 mm) from the hinged side, whichever is farther from the hinge....
-
Wikk Industries Inc. RFID Hand-Free transimitter/With Switch and Bollard Transmitter
Part # RFID 433 AUTOSIG Automatic signaling; Adjustable for range; integrates with and brand/model of access control system (WG Model: Pocket/purse/bag model: Ideal for clean rooms, operating...
-
407.3 Elevator Door Requirements
407.3 Elevator Door Requirements. Hoistway and car doors shall comply with 407.3....
-
404.2.2 Double-Leaf Doors and Gates
404.2.2 Double-Leaf Doors and Gates. At least one of the active leaves of doorways with two leaves shall comply with 404.2.3 and 404.2.4....
-
Accessible Entrances
Entry doors with power operators should remain powered during all hours that the museum is open to the public....
-
11B-404.2.7 Door and gate hardware
Exceptions: Existing locks shall be permitted in any location at existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles...
-
11B-220.1.2 Two automatic teller machines or fare machines
Where two automatic teller machines or fare machines are provided at a location, one shall comply with Sections 11B-707.2 through 11B-707.8 and one shall comply with Sections 11B-707.3,...
-
POWER-ASSISTED DOOR
A door used for human passage with a mechanism that helps to open the door, or relieve the opening resistance of a door, upon the activation of a switch or a continued force applied to the...
-
Hager Companies 4.75" Vestibule Actuator 2-659-0242
standard) - Beveled edges - Graphics embossed onto the faceplate for durability - 304 grade stainless steel scratch resistant finish - Interfaces with 2-659-0187 Programmable Relay and Door...
-
604.8.2.2 Doors
604.8.2.2 Doors....
-
Compartment Doors
Specifications are provided for doors, including their location....
-
DORMA ED400 Swing Door Operator
Engineered for high traffic entrances and heavy-duty applications, the ED400 can handle doors up to 320 lb per door leaf....
-
604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the...
-
604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the...
-
Doors in a Series
Section 404.2.6 specifies the minimum separation between doors and gates in series (48 inches plus the width of doors or gates swinging into the space)....
-
Are exit doors usable only in one direction required to comply on both sides?
Under the ADA Standards, compliance is not required on both sides of those doors or gates that can be used in one direction only, such as exit-only doors....
-
604.8.1.2 Doors
604.8.1.2 Doors....
-
Manual Doors and Gates [§404.2]
Manual Doors and Gates [§404.2]...
