[See subsections ...]
Search Results "Space Limitation"
-
11B-812.5 Accessible routes
-
§ 38.125(d)(1) Requirements
(1) Requirements. All intercity rail cars required to be accessible by §§38.111 (a) and (e) of this subpart shall provide at least one, but not more than two, mobility aid seating...
-
10) Assembly areas
10) Assembly areas ADAAG: * Wheelchair seating: Requirements triggered in any assembly area with fixed seating that seats four or more people. The number of wheelchair...
-
11B-812.8 Identification signs
EVCS identification signs shall be provided in compliance with Section 11B-812.8.
-
11B-812.5 Accessible routes
[See subsections ...]
-
M303.2.5 Surfaces
Wheelchair space surfaces shall not slope more than 1:48 in any direction....
-
M303.2.5 Surfaces
Wheelchair space surfaces shall not slope more than 1:48 in any direction....
-
5.8.3.1 Breast Platform Height Recommendations
Because this recommendation evolved from technologist experience on equipment with less knee space, disability advocates supported the rationale for 26 inches as the minimum....
-
UFAS vs. ADAAG Comparison
by ADAAG's 20% disproportionate limit....
-
307.2 Protrusion Limits
307.2 Protrusion Limits....
-
5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations
The limitation on edge protection height will reduce the possibility that the edge protection will interfere with the patient’s footrest. 5.8.1.2.2 Single Ramp Scale with Edge Protection...
-
4.1.6(1)(d)
(d) No alteration of an existing element, space, or area of a building or facility shall impose a requirement for greater accessibility than that which would be required for new construction...
-
Figure 703.4.2 Location of Tactile Signs at Doors – Drawing from the U.S. Access Board
-
5.8.2.7 Base Support Allowance
Base support is permitted to obstruct the clear floor space if it fits within the allowed base support volume. Base supports can be a maximum of 1½ inches high....
-
A. Aircraft Accessibility
.); Aircraft with 100 or more passenger seats must have priority storage space within the cabin to stow at least one passenger’s folding wheelchair [Sec. 382.21(a)(2)] and DOT has...
-
Individuals with Cognitive Limitations
Individuals with Cognitive Limitations For individuals with cognitive limitations, the additional information processing time required to acquire and understand external stimuli may significantly...
-
III-7.5180 Assembly areas
This section specifies the number of wheelchair seating spaces and types and numbers of assistive listening systems required in assembly areas. 1) Wheelchair seating: Requirements for...
-
Benches [1011.2]
A minimum of 36 by 48 inches of clear ground space must be provided near a bench, with one side of the clear space adjoining an ORAR or trail as applicable....
-
Study Limitations
In addition to the grab bars, the backrest can also be seen as a study limitation....
-
502.4 Floor or Ground Surfaces
Parking spaces and access aisles serving them shall comply with 302. Access aisles shall be at the same level as the parking spaces they serve. Changes in level are not permitted....
-
§ 36.406(f) Assembly areas
Assembly areas subject to the proposed standards shall comply with the provisions applicable to assembly areas, including, but not limited to, sections 221 and 804. ...
-
§ 36.406(f) Assembly areas
Assembly areas subject to this section shall comply with the provisions of the 2010 Standards applicable to assembly areas, including, but not limited to, sections 221 and 802....
-
382.41 What flight-related information must carriers provide to qualified individuals with a disability?
In addition, carriers must provide information about any service limitations in accommodating a passenger with a disability....
-
302.5 With Limited Hearing
Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited hearing....
