Offset strainer with chain and rubber stopper. Furnished with heavy brass elbow and 17GA seamless brass offset tailpiece. 8 3/4" x 5 1/8" OD.
Search Results "Vehicle Pull-Up Space"
- McGuire Manufacturing Co., Inc. 155CRSWC: Offset Lavatory Strainer with Chain and Rubber Stopper
- Hussey Seating Company In-Fill Decks
-
4.1.6(1)(d)
(d) No alteration of an existing element, space, or area of a building shall impose a requirement for greater accessibility than that which would be required for new construction....
-
221.2.2 Integration
The requirement that wheelchair spaces be an "integral part of the seating plan" means that wheelchair spaces must be placed within the footprint of the seating area....
-
11B-221.1 General
Assembly areas shall provide wheelchair spaces, companion seats, designated aisle seats and semi-ambulant seats complying with Sections 11B-221 and 11B-802....
-
11B-221.1 General
Assembly areas shall provide wheelchair spaces, companion seats, designated aisle seats and semi-ambulant seats complying with Sections 11B-221 and 11B-802....
-
T302 Walking Surfaces
Another commenter, a transportation research center, noted that the wheelchair securement systems used in many non-rail vehicles—especially small buses and vans—are floor mounted and have...
-
Secondary market ticket sales. (Section-by-Section Analysis)
know: Question 20: If an individual resells a ticket for accessible seating to someone who does not need accessible seating, should the secondary purchaser be required to move if the space...
-
1007.6.1 Size
Each area of refuge shall be sized to accommodate one wheelchair space of 30 inches by 48 inches (762 mm by 1219 mm) for each 200 occupants or portion thereof, based on the occupant load...
-
Clearances
Clearances Wheelchair spaces on amusement rides must comply with the following provisions, with three exceptions: Securement devices may overlap required clearances....
-
1003.2.13.5.1 Size
Each area of refuge shall be sized to accommodate one wheelchair space of 30 inches (762 mm) by 48 inches (1219 mm) for each 200 occupants or portion thereof, based on the occupant load...
-
11B-604 Water closets and toilet compartments
around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible routes, clear floor space...
-
5.3.2.2 Surface
The surface of the turning space and clear floor or ground space shall be firm and stable....
-
802.3 Companion Seats
Companion seats shall comply with 802.3.
-
11B-802.3 Companion seats
Companion seats shall comply with Section 11B-802.3.
-
604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with 604.3.
-
604.3.1 Size
Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear...
-
F202.6 Leases
Buildings or facilities for which new leases are negotiated by the Federal government after the effective date of the revised standards issued pursuant to the Architectural Barriers...
-
604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with 604.3.
-
604.3.1 Size
Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear...
-
802.3 Companion Seats
Companion seats shall comply with 802.3.
-
Wheelchair seating locations must be on an accessible route
• Wheelchair seating locations must be on an accessible route that provides access from parking and transportation areas and that connects to all public areas, including concessions,...
-
Whenever more than 300 seats are provided, wheelchair seating locations must be provided in more than one location.
• Whenever more than 300 seats are provided, wheelchair seating locations must be provided in more than one location. This is known as dispersed seating. Wheelchair seating locations...
-
Seating
[See subsections ...]