Additions and alterations to existing buildings or facilities, including leased buildings or facilities, shall comply with F202.
Search Results "Vehicle Pull-Up Space"
Filters
Commonly Searched Documents
-
F202.1 General
-
F202.6.4 Parking
Parking shall comply with F208.
-
Sec. 469.003(a)(3)
(3) a building leased for use or occupied, in whole or in part, by the state under a lease or rental agreement entered into on or after January 1, 1972;
-
Water Hydrants
The surface at the base of water hydrants at recreation areas must be firm and stable with a 60-inch turning radius. See the "Surfaces" rule of thumb above. You can also build a wood...
-
T603.3 Design Load
Wheelchair securement systems shall comply with the design loads specified in T603.3.1 or T603.3.2, as applicable.
-
Accessible seating must be an integral part of the seating plan
• Accessible seating must be an integral part of the seating plan so that people using wheelchairs are not isolated from other spectators or their friends or family.
-
12162(b)(2) New commuter rail cars
(2) New commuter rail cars
-
Scoping [4.1.2(3), 4.1.3(2)]
Requirements for protruding objects apply to all circulation routes, including both accessible and inaccessible routes and include corridors, walks, courtyards, stairways, and areas...
-
3.3.4 Clear Floor Length
3.3.4 Clear Floor Length The mean value of clear floor length for our study (1250 mm or 49 in.) is above the clear floor length provided in the U.S. standards (1220 mm or 48...
-
Maneuvering for Turns
Maneuvering for 180 degree turns varies by person and the mobility aid used. An efficient way of turning using a manual wheelchair is to turn the wheels in opposite directions for a...
-
68.101. State Leases
68.101. State Leases. (Effective April 1, 1994, 19 TexReg 167; amended effective June 26, 2000, 25 TexReg 6122; repealed effective November 5, 2001, 26 TexReg 8807, new rule section...
-
68.101(c) TAS Requirements
(c) Buildings or facilities that are leased or occupied in whole or in part for use by the state, shall meet the following requirements of TAS:
-
68.101(a) State Leased Buildings > $12,000
(a) State leased buildings or facilities with an annual lease expense in excess of $12,000 shall be registered with the department by completing a State Lease Registration form and...
-
11B-608.2.2.1 Clearance
11B-608.2.2.1 Clearance. A 36 inch (914 mm) wide minimum by 60 inch (1524 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment. [2010...
-
§ 38.77 Interior circulation, handrails and stanchions
[See subsections ...]
-
§ 38.57 Interior circulation, handrails and stanchions
[See subsections ...]
-
11B-608.2.2.1 Clearance
A 36 inch (914 mm) wide minimum by 60 inch (1524 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment. [2010 ADA Standards] 608.2.2.1...
-
Sec.36.308(a)(1)(ii)
(ii) Locate the wheelchair seating spaces so that they --...
-
12162(a)(2)(D)(ii)
(ii) have space to park and secure a wheelchair;...
-
11B-805.4.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
5.9.2 Standing Supports on Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
5.9.2 Standing Supports on Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations...
-
1014.2.1.1.1 Surface
The surface of the clear ground space shall be firm and stable....
-
1014.2.1.1.1 Surface
The surface of the clear ground space shall be firm and stable....
-
4.15.5(1)
(1) Wall- and post-mounted cantilevered units shall have a clear knee space between the bottom of the apron and the floor or ground at least 27 in (685 mm) high, 30 in (760 mm) wide, and...