The horizontal extension of a handrail shall be 12 inches (305 mm) long minimum and a height equal to that of the sloping portion of the handrail as measured above the stair nosings....
Search Results "Unit of Measurement"
-
11B-505.10.3 Bottom extension at stairs
- Access-Able Designs Shower Transfer Bench SH-420-2SDL
- Doorbell Factory Small Rectangle Stainless Steel Doorbell
- Boolee Voting Booth
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND EDX INC. UNDER THE AMERICANS WITH DISABILITIES ACT DJ No. 202-36-255
[See subsections ...]
-
F206.2.3 Multi-Story Buildings and Facilities
, all common use areas serving residential dwelling units with mobility features required to comply with 809.2 through 809.4, and public use areas serving residential dwelling units are...
-
11B-604.5.2 Rear wall
includes the following interpretation of Subsection 11B-604.5.2: CBC Section 1224.14.2.7 requires the provision of a flushing-rim clinical sink in the soiled utility room of a nursing unit...
-
11B-604.5.2 Rear wall
includes the following interpretation of Subsection 11B-604.5.2: CBC Section 1224.14.2.7 requires the provision of a flushing-rim clinical sink in the soiled utility room of a nursing unit...
-
Areas of a public entity open to the public, participants in services, programs, or activities, or invitees. (Section-by-Section Analysis)
Consistent with CDC guidance, it is generally appropriate to exclude a service animal from limited-access areas that employ general infection-control measures, such as operating rooms and...
-
E. IMPLEMENTATION AND ENFORCEMENT
If the United States believes that the Museum is not in compliance with this Agreement or any requirements contained herein, the United States agrees to notify the Museum in writing of the...
-
Side Approach
Side Approach Clear space for a side approach is specified for units that are free-standing or built-in....
-
II. BACKGROUND
BACKGROUND The United States initiated an investigation of the SCDC pursuant to Title II of the Americans with Disabilities Act (ADA), 42 U.S.C. §§ 12131-12134, following receipt...
-
M305.2.1 Location
Transfer supports shall comply with M305.2.1.1 or M305.2.1.2 and shall be located 1 ½ inches (38 mm) maximum measured horizontally from the plane defined by the nearest edge of the transfer...
-
§ 36.304(d)(5) Qualified small business
where readily achievable for a given year if, during that tax year, the entity has spent an amount equal to at least one percent (1%) of its gross revenue in the preceding tax year on measures...
-
Cross Slope
Cross Slope—The percentage of rise to length when measuring the trail tread from edge to edge perpendicular to the direction of travel....
-
4.34.3(2)(a) Reach Depth Not More Than 10 in
Where the reach depth to the operable parts of all controls as measured from the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion...
-
Drinking Fountain Water Flow Tool
Drinking Fountain Water Flow Tool This handy tool was developed by Evan Terry Associates to assist its surveyors in measuring drinking fountain water flow....
-
1.1.2 Walks
Measure walks and other non - ramp pedestrian surfaces for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with 1.1.3...
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
703.2.5 Character Height
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter "I"....
-
§40.2(a)(1)
(1) Constructed or altered by or on behalf of the United States;...
-
3.3.2. Audio Description Hardware Scoping Requirements
Unlike closed movie captioning hardware, one unit of audio description hardware per auditorium is not necessary to provide audio description. ...
-
1010.1.5 Floor elevation
Landings shall be level except for exterior landings, which are permitted to have a slope not to exceed 0.25 unit vertical in 12 units horizontal (2-percent slope)....
- Welch Allyn Scale-Tronix® Integrated Scales