An exception is provided for "existing locks at existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed...
Search Results "Interior Design"
-
Door and Gate Hardware
-
Combination Wheelchair/Horse Accessible Gates
The "V" gate design (see figure 5) allows wheelchairs and horses, but only restricts ATVs—not motorcycles....
-
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment
It will be located at the designated transfer location....
-
Transfer Supports Location and Configuration M301.3 and M302.3
The shape (contours and curves along length for ergonomics, not cross sectional profile) was kept open to give manufacture flexibility in the design as the direction of positioning (i.e....
-
NPRM
The “common wheelchair” originated as a design concept, answering the question of what a vehicle lift should be designed to accommodate, but has also been applied as an operational concept...
-
1004.1 Clear Floor Space
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
E102.2 ANSI/HFES (Section-by-Section Analysis)
This standard provides ergonomic guidance and specifications for the design of accessible software for use at work, in the home, in educational settings, and in public places....
-
Parking Spaces [4.6.3]
"Universal" parking spaces can be provided instead of separate standard and van spaces; (designated van spaces are not required under this design)....
-
Other Counters/ Teller Windows [7.2(2)]
Other Counters/ Teller Windows [7.2(2)] Alternatives to 36-inch high counters (lowered portions, folding shelves) are recognized since other design considerations (security, use by standees...
-
Refuge Islands
When designing a path crossing of a roadway, refuge islands are frequently provided between opposing motor vehicle traffic flows to allow pathway users to cross only one direction of traffic...
-
Technical difficulty and readily achievable
feasibility, the business should still consider if it is possible to make some type of change that will improve access, even if it falls short of meeting the 2010 ADA Standards for Accessible Design...
-
11B-1004.1 Clear floor space
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
STORY
[DSA-AC] That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
11B-1004.1 Clear floor space
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
4.3.8 Operating forces
From these data, we can only make some broad conclusions for design and standards based on a large sample of people with relatively severe disabilities....
-
Haws AXION® MSR - Eye/Face Wash and Shower Products
Learn more about the AXION® MSR design and features in this video. To learn more, visit hawsco.com or axionmsr.com...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
(8) the City's policies and procedures
(8) the City's policies and procedures regarding new construction and alterations, which do not require a close-out inspection for compliance with federal disability access design standards...
-
Technical Memorandum TM 2012-09 Employee Break Rooms
22, 2013 2012 TAS Reference: 212 and 804 In accordance with TAS 106.5.28, kitchenettes and break rooms are not employee work areas; therefore, they must be accessible and must be designed...
-
§27.7(d) Aid, benefits, or services limited by Federal law
For aid, benefits, or services authorized by Federal statute or executive order that are designed especially for persons with a disability, or for a particular class of persons with a disability...
-
§27.11(c)(1)
(1) A recipient shall, within 90 days from the effective date of this part, designate and forward to the head of any operating administration providing financial assistance, with a copy...
-
On-Board Wheelchairs
On-Board Wheelchairs When required, on-board wheelchairs must be equipped with specific features and be designed to be compatible with the maneuvering space, aisle width, and seat height...
-
§35.170(c)
An individual may file a complaint with any agency that he or she believes to be the appropriate agency designated under subpart G of this part, or with any agency that provides funding...
-
101.1.4
to expand or diminish the defenses available to a place of public accommodation or a commercial facility under the Americans with Disabilities Act and the ADA Standards for Accessible Design...
