The viewing space shall be 32 inches (815 mm) maximum and 51 inches (1295 mm) minimum high above the ground and shall extend the full width of the clear ground space....
Search Results "Expected Maximum Flight Duration"
-
1015.3 Viewing Space
-
M303.2.4.2 Knee Clearance
Knee clearance shall be provided at a depth of 11 inches (280 mm) minimum and 25 inches (635 mm) maximum at 9 inches (230 mm) above the floor and at a depth of 8 inches (205 mm) minimum...
-
M302.4.1 Clearance in Base
Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
M301.4.1 Clearance in Base
Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
11B-403.5.3 Passing spaces
An accessible route with a clear width less than 60 inches (1524 mm) shall provide passing spaces at intervals of 200 feet (60,960 mm) maximum....
-
Protrusion Limits [§307.2]
Those with leading edges that are within cane sweep (27” high maximum) or that provide minimum headroom clearance (80” minimum) do not pose hazards and can protrude any amount....
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2....
-
§ 38.159(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, measured on level ground, for a maximum rise of 3 inches (75 mm), and the transition from roadway...
-
1607.8.2 Grab bars, shower seats and dressing room bench seats
room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar or seat so as to produce the maximum...
-
11B-403.5.3 Passing spaces
An accessible route with a clear width less than 60 inches (1524 mm) shall provide passing spaces at intervals of 200 feet (60,960 mm) maximum....
-
1607.8.2 Grab bars, shower seats and dressing room bench seats
room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar or seat so as to produce the maximum...
-
Kawneer North America 190/350/500 Standard Entrances
strength for buildings experiencing heavy traffic conditions General Heights vary to 10 feet; widths range from approximately 3 to 4 feet Door frame face widths range to a maximum...
-
Guardian Barrier-Free WideArea™ Eye/Face Wash GBF1724
Profile of unit is “flattened” to comply with maximum height and knee clearance requirements....
-
Stanley Magic-Force™ Full or Low Energy Swing Door Operator
STANLEY Magic-Force™ operator allows for maximum flexibility at design phase and upon installation because it is field adjustable to work as both full energy (motion activated) or low energy...
-
3. Costs—Summary of Likely Economic Impact
Any additional repair costs for captioning and audio description equipment are thus expected to be de minimis....
-
T-Base Communications
decades of experience, the T-Base team, equipped with robust corporate standards, and working in state-of-the-art secure production facilities, is dedicated to ensuring that your high expectations...
-
Regulatory Process Matters
The defense agencies appear to have the highest information technology budgets, while civilian agency budgets are expected to increase rapidly....
-
M301.3 Transfer Supports
Circular cross sections – Circular cross sections must have an outside diameter of 1¼ inches minimum and 2 inches maximum....
-
Exploring the Effects of Swedish Massage: What I Discovered Through Experience
I expected temporary comfort, nothing more. When the session began, I noticed the pace immediately felt deliberate. Slow movements mattered....
-
Summary of Significant Changes
For purposes of this requirement, a “large transit entity” is defined as a provider of public transportation that operates 100 or more buses in annual maximum service for all fixed route...
-
M307 Operable Parts
The Wheeled Mobility Anthropometry Project recommended that the 5 pounds maximum force be retained for other types of operable parts....
-
Hadrian Inc. Stainless Steel Toilet Partitions
Enhanced Privacy Options Achieve maximum privacy with optional extended panels and doors as well as full height channels to completely eliminate all sightline gaps....
-
BEA Inc. PBDGP Series Vestibule Push Plate (Push to Open)
Stainless steel faceplate is scratch/scuff resistant and will not deteriorate or rust from exposure to liquids and other cleaning products Graphics are etched onto the faceplates for maximum...
-
American Standard Colony PRO Laundry Faucet 7074.140
This faucet has a maximum flow rate of 1.5 gallons per minute to help save water, without sacrificing performance....
