Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
Search Results "Swing Clear Hinge"
-
1008.4.4 Entry Points and Seats
-
810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1) and shall have a clear...
-
AJW Architectural Products U648 Series C-fold/Multifold Towel Dispenser & Waste Receptacle Combination w/ Extended Waste - Recessed
Hinges: Full length, stainless steel piano type hinge. Locks: Pin tumbler commercial quality. Collars: Fabricated of #22 ga stainless steel finished to match cabinet body....
-
Kawneer North America 260/360/560 Insulclad™ Thermal Entrances
of door, fully integrated door frame (with or without transoms) and integrated hardware; stile face widths of 2-1/8" (54), 3-1/2" (88.9) and 5" (127) Dual Moment corner construction, hinges...
-
AJW Architectural Products U5704 Unidoor 2 Gallon Sanitary Napkin Disposal - Recessed
Hinges: Full length, stainless steel piano type hinges. Locks: Pin tumbler commercial quality locks keyed like all other AJW accessories....
-
Disability Resource Agency for Independent Living (DRAIL) - Modesto, Stockton, Sonora, CA
We want to enable you to live independently and will do that by supporting you with technology, helping you get connected to resources and services that clear the path towards optimizing...
-
403 Walking Surfaces
Section 403.5 includes requirements for the clear width of walking surfaces....
-
Video interpreting services. (Section-by-Section Analysis)
To address these potential problems, the Department is proposing the inclusion of four performance standards for VIS to ensure effective communication: (1) High quality, clear, real-time...
-
Video interpreting services. (Section-by-Section Analysis)
potential problems associated with the use of VIS, the Department is proposing the inclusion of four performance standards for VIS to ensure effective communication: (1) High quality, clear...
-
Signal Clearance Intervals
clearance intervals are intended to allow those roadway users who are approaching a traffic signal that changes to yellow, and cannot stop before the signal turns red, time to enter and clear...
-
Applying the Accessibility Standards to the Plan, Installation, and Maintenance of Ground Level Accessible Routes for Playgrounds
Is the surface for the accessible route, clear ground space and turning space compliant with ASTM F1951-99 Standard Specification for Determination of Accessibility of Surface Systems Under...
-
एस कुमार के खेल-कूद से जुड़े आंकड़े
Examining his career records, match performances, and key statistics provides a clear picture of his strengths, whether with the bat, ball, or in the field....
-
405 Ramps
A clearance of 36 inches between handrails is required, except at those ramps that qualify for the clear width exception in 405.5. Comment....
-
11B-707.6.3.2 Tactile symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
707.6.3.2 Tactile Symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
1017.8.2 Width
Where resting intervals are provided adjacent to the trail tread, the resting interval clear width shall be 36 inches (915 mm) minimum....
-
902.4 Dining Surfaces and Work Surfaces for Children's Use
EXCEPTION: Dining surfaces and work surfaces that are used primarily by children 5 years and younger shall not be required to comply with 902.4 where a clear floor or ground space complying...
-
4.3.4 Passing Space
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
Forward Approach
Clear floor space must be provided to the face of the unit since the seated forward reach does not extend much beyond the toes....
-
4.3.4 PASSING SPACE
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
4.7.3 Slope
The slope of the clear floor or ground spaces required by section 4.0 shall not exceed 1:48 (2 percent) in any direction. Exception....
-
1017.8.2 Width
Where resting intervals are provided adjacent to the trail tread, the resting interval clear width shall be 36 inches (915 mm) minimum....
-
Side Reach [§308.3]
The maximum reach depth for this range is 10” measured from the available clear floor space....
