Troy Balthazor, ADA Specialist for the Great Plains ADA Center, gives an overview of accessible parking requirements from the 2010 ADA Standards for Accessible Design. Technical...
Search Results "Hybrid Surface System"
-
Accessible Parking Video Fact Sheet
-
M305.3.1 Length
The length of gripping surfaces for standing supports shall be based on the position of the standing supports in relation to the standing surfaces they serve....
-
Signaids Men's Washroom Directional Sign
WASHROOM SIGNS - Braille and Tactile Men's Accessible Washroom Directional Sign - 200mm x 240mm Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) -...
-
Annex C EXCERPTS FROM THE DOJ’s 2010 ADA STANDARDS
The excerpts in this annex are a listing of some key provisions related to notification and way finding for your evacuation plan from the 2010 ADA Standards, as adopted by the...
-
17. Q. What about "911" calls? How are those made accessible to people with speech or hearing disabilities?
A: Individuals with hearing and speech disabilities must have direct access to "911" or similar emergency telephone services, meaning that emergency response centers must be equipped...
-
Mobility Device Size and Type
[See subsections ...]
-
5.4.7 Transfer Support Gripping Surface Clearance for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.7 Transfer Support Gripping Surface Clearance for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....
-
5.3.2.2 Transfer Sides for Imaging Equipment
The transfer surface should be provided on at least one long side of the table....
-
Figure 505.4 Handrail Height – Drawing from the U.S. Access Board
-
Section B: Passenger Drop-Off Area
Yes No N/A Comments/Remedies B1 Is the vehicle pull-up space on a level surface, with slopes not exceeding 1:48 in all directions?...
-
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment On imaging equipment, the transfer surface is oriented along the long dimension of the surface where...
-
Accessible Parking
Maintain curb ramps and sidewalks to prevent large cracks and uneven surfaces from forming....
-
11B-809.9.1 Clear floor space
Clear floor spaces 30 inches (762 mm) by 48 inches (1219 mm), with centerlines aligned with the centerline of the work surface, appliance, sink or fixture, shall be provided in the following...
-
surface mounted toilet paper dispensers
Surface mounted dispensers are now being used for design and construction convenience, and they appear to pose an unnecessary hazard of injury due to the amount they project from the wall...
-
DOT Final Rule: Minimum Sound Requirements for Hybrid and Electric Vehicles
This PDF Document is a “prepublication version” of the “Final Rule” on “Minimum Sound Requirements for Hybrid and Electrical Vehicles” signed by Administrator Mark R....
-
Key Study findings:
When multiple transfers are required to reach higher or lower surfaces 15.2% of the participants in this study could not complete them at any height (11 out of 72 participants; 8 of which...
-
Sales and Service Counters, Teller Windows, Information Counters [7.2]
Sales and Service Counters, Teller Windows, Information Counters [7.2] ADAAG generally specifies accessible counter heights up to 34 inches [4.32] but allows a height up to 36...
-
1.1.7 Measurement of parking areas
1.1.7 Measurement of parking areas. Only accessible access aisles and passenger loading zones that are part of a larger parking area need to be measured. These areas should be...
-
Circular Cross Section and Clearance (§505.5, §505.7)
Circular Cross Section and Clearance (§505.5, §505.7)
-
Assistive Listening Systems: ADA Standard Section 216.10
Section 216.10 covers scoping requirements in the current ADA Standards for assistive listening signs.
-
M305.3.1 Length (Section-by-Section Analysis)
In the MDE NPRM, the Access Board proposed a gripping surface length of four inches minimum for horizontal standing supports. No public comments were submitted on this requirement....
-
M301.2.2 Sunset
The low transfer position height, Item A of M301.2.1, shall cease to have effect on [Insert date 5 years after date of publication in the Federal Register].
