When the lift is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and vehicle floor shall not exceed 1/2 inch...
Search Results "Grab Bar Height"
Filters
Commonly Searched Documents
-
§ 38.83(b)(7) Platform gaps
-
§ 38.107(a)(1)
Fold-down or retractable seats or shelves may overlap the clear floor space at a lower height provided they can be easily folded up or moved out of the way....
-
§ 38.123(a)(1)
Fold-down or retractable seats or shelves may overlap the clear floor space at a lower height provided they can be easily folded up or moved out of the way....
-
§ 38.23(b)(7) Platform gaps
When the platform is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed...
-
11B-303.5 Warning curbs
(102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning curbs at least 6 inches (152 mm) in height...
-
b. A Qualified Person with a Disability
physical and communication barriers; and (3) providing auxiliary aids or services for effective communications.18 Essential eligibility requirements can include minimum age limits or height...
-
BACKGROUND
rooms, hospitals, and other medical settings.1 In response, the Access Board issued a notice of proposed rulemaking2 that, among other things, would specify a maximum lower adjustable height...
-
INVESTIGATION AND FINDINGS
On the basis of its investigation, the Department determined that Chicago Heights denied the Complainant appropriate auxiliary aids and services necessary for effective communication during...
-
§35.130(b)(8) (Section-by-Section Analysis)
It prohibits overt denials of equal treatment of individuals with disabilities, or establishment of exclusive or segregative criteria that would bar individuals with disabilities from participation...
-
Manual vs. Power (RMS Values)
However, Figure 20 does show the average seat RMS data for all of the surfaces with 95 percent confidence bars. Figure 20: Seat RMS values with 95 percent confidence bars ...
-
III−1.1000 General
Are continuing education courses sponsored by a State bar association subject to title III? Yes....
-
Test Courses & Surfaces
Table 2 Reference Carpet and Pad Carpet Code Level loop, 100% nylon with a woven polypropylene backing; 0.16 in pile height; 28 oz pile weight C1...
-
4. Organization of Technical Criteria
equipment that is designed for use by patients seated in a wheelchair would have to meet the technical criteria for wheelchair spaces, changes in level at entry to the wheelchair space, and height...
-
Section 35.151(f) Housing at a place of education
For example, only reinforcements for grab bars need to be provided in residential dwellings, but the actual grab bars must be installed under the transient lodging standards....
-
When door vision lights are limited to 100 square inches by the fire code, is compliance with the specified maximum height of 43” to the bottom edge still required?
Yes. The Standards do not exempt such doors from the requirement for vision lights (§404.2.11). However, compliance is not required when the lowest part of the vision light is more...
-
Measuring Techniques
The design and placement of grab bars are also guided by strength capabilities, chiefly in the hands and arms....
-
Section 36.301 Eligibility Criteria (Preamble, Section-by-Section Analysis)
It would violate this section to establish exclusive or segregative eligibility criteria that would bar, for example, all persons who are deaf from playing on a golf course or all individuals...
-
Section 36.301 Eligibility Criteria (Section-By-Section Analysis and Response to Comments)
It would violate this section to establish exclusive or segregative eligibility criteria that would bar, for example, all persons who are deaf from playing on a golf course or all individuals...
-
Standing Supports (M304.3 and M305.3)
Standing supports that adjust from horizontal to vertical positions and at angles in between, such as a bar that folds up and locks into multiple positions, can be used....
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
-
III-4.4500 Priorities for barrier removal
. , lowering towel dispensers or installing grab bars) in each restroom?...
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
-
11B-803.1 General
Section 903.5 requires dressing room bench seats to be installed so that they are at the same height as a typical wheelchair seat, 17 inches (430 mm) to 19 inches (485 mm)....
-
11B-303.5 Warning curbs
(102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning curbs at least 6 inches (152 mm) in height...