surface....
Search Results "End Transfer Surface"
-
903.4 Back Support
-
Handrail Extensions
Handrail Extensions ADAAG addresses handrail height, diameter, and extensions provided to the end of the gangway....
- ADA Solutions, Inc. Cast in Place Tactile Surface
-
Taking Measurements
Taking Measurements Sloped Surfaces One way to measure slope is to use a 24-inch level with leveling bubble and a tape measure....
-
Ground and Floor Surfaces [4.5]
[See subsections ...]
-
17. If a soil stabilizer was installed as part of the trail surface material, please indicate the product name.
If a soil stabilizer was installed as part of the trail surface material, please indicate the product name....
- Gamco Surface Mounted Hand Dryer - DR-5128
- Gamco Surface-Mounted Robe Hook Satin - 76717
-
11B-502.6.3 Location
Signs shall be permanently posted either immediately adjacent to the parking space or within the projected parking space width at the head end of the parking space....
-
11B-502.6.3 Location
Signs shall be permanently posted either immediately adjacent to the parking space or within the projected parking space width at the head end of the parking space....
- Bobrick Surface-Mounted Sharp Disposal B-350169
-
T402.7 Edge Guards
Ramps and bridgeplates shall provide edge guards continuously along each side of the ramp or bridgeplate to within 3 inches (75 mm) of the end of the ramp or bridgeplate that is deployed...
-
31. Please indicate the number of the complete replacements of the trail surface that you have already performed
Please indicate the number of the complete replacements of the trail surface that you have already performed (in total, so far):...
- Just Manufacturing Surface Mount Paper Towel Dispenser 400 Capacity
- American Specialties 9012 Surface Mounted Baby Changing Station
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
Front end clunking on my Cayenne over speed bumps, anyone dealt with this in Abu Dhabi?
- DOT: Pedestrian and Bicycle Funding Opportunities
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
- Door King Inc. 1515 Surface Mount Entry Keypad
-
6.3 Minority Reports
6.3 Minority Reports Because the Advisory Committee did not achieve consensus on the recommendation for a minimum transfer surface height standard, U.S....