We have some of our standards relative to lighting that we think are appropriate for whatever function that we’re doing; it’s different needs for different functions....
Search Results "1991 Standards"
-
Issue 14: How can improved lighting and zero net energy goals by achieved while improving health care?
-
T403 Lifts
These commenters urged the Access Board to instead reference existing standards for public vehicular lifts set forth in the FMVSS, which are issued by the National Highway Traffic Safety...
-
Literature Cited
Standard specification for impact attenuation of surface systems under and around playground equipment, ASTM F1292....
-
Conclusion
Where the playground surface material fails to comply with safety standards for impact attenuation, children are put at risk of injury. ...
-
15(b)
(b) In determining whether any Post-1993 Owned Hotel and Post-1993 Joint Venture Hotel has complied with the ADA Standards, the Parties agree that each Post-1993 Owned Hotel and each Post...
-
ICC/IBC
[2010 ADA Standards] 105.2.4 ICC/IBC....
-
4.3 Reach Ranges
Thus, standards should reflect the most functional reaching approach....
-
Background
If an agency determines that meeting the standards, when procuring electronic and information technology, imposes an undue burden, it must explain why meeting the standards creates an undue...
-
Allowances for Typical Roadway Geometry
Allowances for Typical Roadway Geometry The 1991 ADAAG and 2004 ADA and ABA Accessibility Guidelines specify a maximum running slope of 5 percent and maximum cross slope of 2 percent...
-
11B-1009.2.4 Seat
[2010 ADA Standards] 1009.2.4 Seat Height....
-
11B-904.4.2 Forward approach
[2010 ADA Standards] 904.4.2 Forward Approach. A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
-
11B-1009.2.4 Seat
[2010 ADA Standards] 1009.2.4 Seat Height....
-
11B-904.4.2 Forward approach
[2010 ADA Standards] 904.4.2 Forward Approach. A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
- BlueDAG App
-
Elevator Landings
In the final rule, this provision has been editorially revised to refer to elevator "landings," consistent with the ANSI A117.1‒2003 standard....
-
Signs Required at Waiting Lines to Amusement Rides
Section 216.12 of the 2010 Standards requires signs at entries to queues and waiting lines identifying type and location of access for the amusement ride....
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
Accessible Means of Entry to Wading Pools
Sections 242.3 and 1009.3 of the 2010 Standards require that at least one sloped means of entry is required into the deepest part of each wading pool....
-
d. ii.
See Standards §§ 4.2.5 and 4.2.6....
-
T403.1 General
Lifts shall comply with T403 and the National Highway Traffic Safety Administration’s Federal Motor Vehicle Safety Standards (FMVSS) for public use lifts at 49 CFR 571.403 and 571.404....
-
§ 36.304(d)(4)(ii)
(ii) Where an existing swimming pool has less than 300 linear feet of swimming pool wall, it shall be exempt from the provisions of section 242.2 of the proposed standards; and...
-
412.8.3 Signal Compatibility
ICT shall support all commonly used cross-manufacturer non-proprietary standard TTY signal protocols where the system interoperates with the Public Switched Telephone Network (PSTN)....
-
702.2 Advanced Television Systems Committee (ATSC)
Copies of the referenced standard may be obtained from the Advanced Television Systems Committee, 1776 K Street NW, Suite 200, Washington, DC 20006–2304 (http://www.atsc.org)....