Section 609.4 covers the current ADA Standards for the position of grab bars.
Search Results "Surface Slope"
Commonly Searched Documents
-
Position of Grab Bars: ADA Standard Section 609.4
- Allegion Von Duprin 94/95 Series INPACT Recessed Exit Device
-
10 - foot straightedge method
The same problem exists when measuring slope. There is no way to measure a localized slope that may actually be greater than the overall slope of the straightedge....
-
1018.8 Resting Intervals
This section contains the technical requirements for the size (1018.8.1) and slope (1017.8.2) of resting intervals....
-
11B-810.2.3 Connection
boarding and alighting areas shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped...
-
Wet Locations: ADA Standard Section 903.7
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
11B-903.7 Wet locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
CURB CUT
[DSA-AC] An interruption of a curb at a pedestrian way, which separates surfaces that are substantially at the same elevation....
-
11B-705.1.1 General
Detectable warnings shall consist of a surface of truncated domes and shall comply with Section 11B-705....
- Kompan, Inc. Elements Play Structures Tower ELE400050
-
11B-233.3.1.2.6.2 Test number one, individual building test
The slopes of the undisturbed site measured in a straight line between the planned entrance and all vehicular or pedestrian arrival points within 50 feet (15,240 mm) of the planned entrance...
-
9.a [§ 4.7.5]
To answer this question you need to determine the slope of the flared sides to make sure it is 10 percent or less....
-
405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this document....
-
Roll-in Access [1014.2.2]
To provide roll-in access into a camp shelter, a level or sloped entry route that complies with the technical requirements for an ORAR or trail, as applicable, must be provided along the...
-
11B-405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this document....
-
11B-405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this chapter....
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
Standards
CSA A23.1 - 94, Treatment of Slab or Floor Surfaces: Surface Tolerances, Straightedge Method. Canadian Standards Association, Toronto, 1994....
-
11B-502.3.3 Marking
The area within the blue borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface, preferably blue or...
-
Curb or Barrier: ADA Standard Section 1005.3.1
Curbs or barriers shall extend 2 inches (51 mm) minimum above the surface of the fishing pier or platform....
-
11B-1005.3.1 Curb or barrier
Curbs or barriers shall extend 2 inches (51 mm) minimum above the surface of the fishing pier or platform....
-
Willoughby Industries WAW-2322 AquaWave® Two Station Solid Surface Lavatory System
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Bradley Model 6542 Surface Mounted, Horizontal Tank, Horizontal Valve Soap Dispenser Model
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Willoughby Industries WAW-2311 AquaWave® Single Station Solid Surface Lavatory System
Requires the Premium User plan or above. (Login or upgrade your account!)