The maximum cross slope permitted on accessible routes in the 2004 ADA and ABA Accessibility Guidelines is 2 percent....
Search Results "Maximum Reach Depth"
-
Cross Slope (R302.6) (Section-by-Section Analysis)
-
3.3.14 Grip Strength
For those individuals able to complete the pinching tasks, the results showed that both the ability to perform a grip and the magnitude of maximum grip force are substantially affected by...
-
Gamco Horizontal Wall-Mounted Baby Changing Station Grey - BCS-2
Depth (closed) 4" (100 mm). Extension (open) 19" (483mm)....
-
Tork Foam Soap Dispenser, Stainless Steel
Product Data System - S4 - Foam Soap System Material - Metal/Plastic Height - 11 in Width - 4 in Depth - 4 in Color - Stainless...
-
Gamco Horizontal Wall-Mounted Baby Changing Station Cream - BCS-1
Depth (closed) 4" (100 mm). Extension (open) 19" (483mm)....
-
Apex Challenge Circuit CH7000
An adjustable lap/leg restraint stabilizes the body to insure maximum intensity during the exercises....
-
Poured in Place Rubber
The maximum values allowable by the standard are 200 for GMAX and 1,000 for HIC. Drop heights from composite equipment up to 8 ft. high passed the field test. ...
-
604.9.3 Height
The height of water closets shall be 11 inches (280 mm) minimum and 17 inches (430 mm) maximum measured to the top of the seat....
-
§ 1194.23(k)(2)
The force required to activate controls and keys shall be 5 lbs. (22.2 N) maximum....
-
5.4.3 Transfer Support Height for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
Transfer supports should be positioned 6 inches minimum and 19 inches maximum above the transfer surface....
-
R309.5.2 Displays and Information
Displays and information shall be visible from a point located 1.0 m (3.3 ft) maximum above the center of the clear space in front of the parking meter or parking pay station....
-
T402.8.1 Deployment to Roadways or to Curb Height Boarding and Alighting Areas
The running slope of ramps and bridgeplates used for deployment to the roadway or to curb-height boarding and alighting areas shall be 1:6 maximum, as measured to ground level with the non-rail...
-
706.4 Sound Pressure Level
Assistive listening systems shall be capable of providing a sound pressure level of 110 dB minimum and 118 dB maximum with a dynamic range on the volume control of 50 dB....
-
M303.2.4 Equipment Clearances (Section-by-Section Analysis)
Due to the reorganization of the equipment clearances provision in the final rule, the knee and toe clearance requirements for the other equipment section have been renamed depth and height...
-
602.7 Drinking Fountains for Standing Persons
Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1090 mm) maximum above the finish floor or ground....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
704.2.1.2 Forward Approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
§ 1194.25(j)(3)
(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
The transfer support should be located a maximum distance of 1½ inches from the transfer surface....
-
R403.4 Operation
The force required to activate operable parts shall be 22 N (5 lbs) maximum....
-
T304.3 Location
Operable parts provided at a wheelchair space shall be located adjacent to the wheelchair space 24 inches (610 mm) minimum and 36 inches (915 mm) maximum from the rear of the wheelchair...
