Search Results "Side-Opening Door"

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  4.10.12(4)

  Controls shall be located on a front wall if cars have center opening doors, and at the side wall or at the front wall next to the door if cars have side opening doors (see Fig. 23(c) and...

• Products and Additional Resources > Products
  Hager Companies Five Knuckle - Full Surface Swing Clear Hinge BB1266
  

  Reversible - For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes:  - USP, US10, US10A, US10B, US26D Note:  - When opened...

• Products and Additional Resources > Products
  Hager Companies Five Knuckle - Half Surface Swing Clear Hinge BB1270
  

  Reversible - For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes:  - USP, US10, US10A, US10B, US26D Note:  - When opened...

• Products and Additional Resources > Products
  Hager Companies Three Knuckle - Full Surface Swing Clear Hinge AB7523
  

  Reversible - For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes:  - USP, US10, US10A, US10B, US26D Note:  - When opened...

• Products and Additional Resources > Products
  Hager Companies Three Knuckle - Half Surface Swing Clear Hinge AB7534
  

  Reversible - For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes:  - USP, US10, US10A, US10B, US26D Note:  - When opened...

• Products and Additional Resources > Products
  TownSteel XME9040 Mortise, Clutched Trim Security Cylinder Mortise Keypad
  

  supply: 4AA battery Battery life: Up to 2 years Operating temperature: -31° to 151° F (-35° to 66°C) Certifications: FCC Part 15, UL 10C, ANSI/BHMA A156.13 Mechanical Specifications Door...

• State and Local Documents > Referenced Standards > Excerpts from 2000 INTERNATIONAL BUILDING CODE®
  709.8 Duct and air transfer openings

  Penetrations by duct and air transfer openings shall comply with Sections 711 and 715....

• Products and Additional Resources > Products
  Sargent 8200 Mortise Lock with BHW Trim
  

  Microshield, an antimicrobial coating 6 Lobe head security screws (Torx type) Matching thumbturn available Patent Pending Ideally suited for:  Behavioral Health Units, Patient Room Doors...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.1 Location

  Transfer supports shall comply with M305.2.1.1 or M305.2.1.2 and shall be located 1 ½ inches (38 mm) maximum measured horizontally from the plane defined by the nearest edge of the...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.4 Cross Section

  Transfer supports shall have a cross section complying with 305.2.4.1 or 305.2.4.2.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.3 Height

  During use, the tops of transfer support gripping surfaces shall be 6 inches (150 mm) minimum and 19 inches (485 mm) maximum higher than the top of the associated uncompressed...

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.2.6 Gripping Surfaces (Section-by-Section Analysis)

  The proposed rule did not provide any specific requirements regarding gripping surfaces on transfer supports. However, in the MDE NPRM preamble the Access Board repeatedly noted that...

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.2.4 Cross Section (Section-by-Section Analysis)

  The proposed rule did not provide specific requirements for the cross section of transfer supports. However, in the MDE NPRM preamble, the Access Board noted that it was considering...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302

  5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302 Description: Transfer supports may contain elements to provide structural support or prevent...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.5 Transfer Support Position Recommendation for M301 and M302

  5.4.5 Transfer Support Position Recommendation for M301 and M302 Description: Transfer support position refers to the placement of the gripping surface within the minimum and...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.2 Transfer Support Length for M301 and M302

  5.4.2 Transfer Support Length for M301 and M302 Description: Transfer support length applies to the gripping surface of the support, that portion of the support used to grasp or...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.7.1 Lift Compatibility Clearance in Base for M301

  5.7.1 Lift Compatibility Clearance in Base for M301 Description: For portable floor lifts to be effective, they must deploy at diagnostic equipment such that the boom of the lifts...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M305.2.1 Location

  Transfer supports shall be located within reach of the transfer surface and shall not obstruct transfer onto or off of the surface when in position.

• Federal Documents > Technical Assistance > Guide to the ADA Standards
  Curb Ramp Requirements [§406]

  Curb Ramp Requirements [§406]

• Federal Documents > Preamble to Regulations > 28 CFR Part 36, Appendix C: Guidance on ADA Regulation on Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities (2010 ADA Title III Regulations: 1991 Preamble and Section-by-Section Analysis)
  Section 36.303 Auxiliary Aids and Services (Preamble, Section-by-Section Analysis)

  The Department has added video text displays, computer-aided transcription services, and open and closed captioning to the list of examples....

• Products and Additional Resources > Products
  Brey-Krause Concealed Mounting Security / Anti Suicide Grab Bars
  

  The concealed mount anti-ligature grab bars are fabricated from 18 gauge stainless steel.  The flange is constructed from 11 gauge stainless steel and is three inches in diameter....

• Products and Additional Resources > Products
  Behavioral Safety Products #GB350 Suicide Resistant Safety Grab Bar with Full Closure Plate
  

  Product Description We offer this suicide resistant grab bar in seven lengths: 18", 24", 30", 32", 36", 42", and 48". All lengths except for the 18" and 32" are available for...