Ambulatory accessible compartments shall have a depth of 60 inches (1525 mm) minimum and a width of 35 inches (890 mm) minimum and 37 inches (940 mm) maximum....
Search Results "Maximum Extent Practicable"
-
604.8.2.1 Size
-
902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
1009.6.2 Handrails
The width between handrails shall be 20 inches (510 mm) minimum and 24 inches (610 mm) maximum. Handrail extensions required by 505.10.3 shall not be required on pool stairs....
-
903.3 Size
Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
602.5 Spout Location
The spout shall be located 15 inches (380 mm) minimum from the vertical support and 5 inches (125 mm) maximum from the front edge of the unit, including bumpers....
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
703.2.8 Line Spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
TutorsAcademy: Strengthening Academic Skills Through Flexible Learning
Some learners may understand concepts quickly, while others may require additional examples and practice before feeling comfortable with a topic....
-
TownSteel TDG129 Door Guard
SPECIFICATION Material Zinc alloy plated to match finish Maximum Door Opening 4" when engaged Door Angle Protector Included with screws Door Guard Shim Come with standard package...
-
Pressalit Care PLUS Support Arm Fixed Height Swing Grab Bar
Maximum load: 330lbs. (150 kg)...
-
Sargent 8200 Lever Lock
SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability....
-
11B-1009.2.1 Pool lift location
Pool lifts shall be located where the water level is 36 inches (914 mm) minimum and 48 inches (1219 mm) maximum. [2010 ADAS] 1009.2.1 Pool Lift Location. ...
-
Side guard protocol
Then the height of the platform was adjusted incrementally in height: higher and lower than the subject’s seat and the maximum transfer heights high/low that were attainable were recorded...
-
11B-411.2.1.2.3 Accessibility function button
Each dot shall have a base diameter of 0.059 inch (1.5 mm) minimum and 0.063 inch (1.6 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
11B-1009.2.1 Pool lift location
Pool lifts shall be located where the water level is 36 inches (914 mm) minimum and 48 inches (1219 mm) maximum. [2010 ADAS] 1009.2.1 Pool Lift Location....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be installed 6 inches (152 mm) maximum from adjacent walls. [2010 ADA Standards] 608.3.2 Standard Roll-In Type Shower Compartments....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
XIII. Enforcement of the ADA and its Regulations
Individuals may also file complaints with the Attorney General who is authorized to bring lawsuits in cases of general public importance or where a "pattern or practice" of discrimination...
-
Can the Justice Department run elections to make sure they are fair?
If you have a question about election practices, candidate qualifying rules, the location of polling places, or other voting procedures in your jurisdiction, contact your local or state...
-
502.3.7 Actions (Section-by-Section Analysis)
While this requirement is new to the 508 Standards, it represents widespread industry practice. It is also already a feature provided by software designed to be accessible....
-
E102.3 ANSI/IEEE (Section-by-Section Analysis)
This standard is consistent with current telecommunications industry practices. Products conforming to this standard minimize interference to hearing aids by wireless telephones....
-
603.2 Information on Accessibility and Compatibility Features
A best practice is for ICT support services to provide training programs about the following topics: accessibility requirements for individuals with disabilities; methods of communication...
