At the time the second phase is complete, ramps must be used to connect at least 5 of the elevated play components and transfer systems are permitted to be used to connect the rest of the...
Search Results "Ramp Length"
Filters
Commonly Searched Documents
-
F240.1.1 Additions
-
810.5.3 Platform and Vehicle Floor Coordination
In some cases, the vehicle guidelines permit use of a low platform in conjunction with a lift or ramp....
-
R302.7.1 Vertical Alignment
Vertical alignment shall be generally planar within pedestrian access routes (including curb ramp runs, blended transitions, turning spaces, and gutter areas within pedestrian access routes...
-
240.1.1 Additions
At the time the second phase is complete, ramps must be used to connect at least 5 of the elevated play components and transfer systems are permitted to be used to connect the rest of the...
-
10.3.1(9)
systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements, mini-high platforms, car-borne or platform-mounted lifts, ramps...
-
Edge Protection [4.8.7]
A rail mounted close enough to the ramp surface to prevent passage of a 4 inch diameter sphere can function like a curb in keeping front casters from getting stuck on vertical posts and...
-
Furnishings and Equipment
This includes requirements for assistive listening systems, visual alarms, shower seats, ramps, and platform lifts....
-
11B-240.2.2 Elevated play components
For purposes of this section, ramps, transfer systems, steps, decks, and roofs are not considered elevated play components....
-
1127B.1
be designed to provide access to all entrances and exterior ground floor exits, and access to normal paths of travel, and where necessary to provide access, shall incorporate pedestrian ramps...
-
Reasonable Modification of Policies and Procedures
If a city requires a 12-foot set-back from the curb in the central business district, it may be reasonable to grant a 3-foot variance for a store wishing to install a ramp at its entrance...
-
III-5.3000 Application of ADAAG
ADAAG requirements for ramping steps can be applied to the design of new bowling alleys, resulting in an accessible bowling alley....
-
III-7.2100 Equivalent facilitation
use the multiple-occupancy rooms at the cost of a single-occupancy room (§9.1.4(2)); 5) If balconies or terraces cannot be made accessible because wind or water damage will result, a ramp...
-
Section 37.165 Lift and Securement Use
Consequently, the driver or other personnel must provide assistance with the use of lifts, ramps, and securement devices....
-
Section 37.165 Lift and Securement Use
Consequently, the driver or other personnel must provide assistance with the use of lifts, ramps, and securement devices....
-
Federal Highway Administration (FHWA): ADA/Section 504 Programs
Section 504 responsibilities not detailed specifically in Title II of the ADA are: Rest areas on Interstate highways must be accessible; and pedestrian overpasses, underpasses, and ramps...
-
Rebuilding Together Of the Triangle - Raleigh, NC
toilets and pipes Replace outlets & repair unsafe wiring Install appropriate ventilation Replace drywall Patch leaking roofs Build wheelchair ramps...
-
Metropolitan Center for Independent Living (MCIL) - Minneapolis, MN
provides include: Housing Referral Services Transition program for young adults with disabilities Consumer-directed Personal Attendant Services program Ramp...
-
Southwest Center for Independent Living (SCIL) - Springfield, MO
Access Consumer Directed Services (CDS) Education & Outreach In Home Services Mental Health Counseling Renovation and Modification Projects (RAMPS...
-
What types of communication aids and services would a public accommodation be required to provide to persons with HIV or AIDS?
The type of auxiliary aid or service necessary to ensure effective communication will vary in accordance with the length, importance, and complexity of the communication involved....
-
Issues Related to the Interactive Process and Return to Work
the reason an accommodation or work restriction is needed (that is, the limitations that prevent an employee from returning to work without reasonable accommodation); the length...
-
M305.3 Standing Supports (Section-by-Section Analysis)
This provision has been reorganized in the final rule into requirements for length and height, as opposed to vertical and horizontal....
-
5.4.3 Transfer Support Height for M301 and M302
Figure 5.4.3 Height of Transfer Supports (SOURCE: Midmark Corporation) B: 6 inches minimum and 19 inches maximum from the top of the transfer surface C: Transfer support length,...
-
Guidelines for Requirement 6
number of commenters requested that the Department specify the dimensions for grab bar reinforcement, and suggested that grab bar reinforcing material run horizontally throughout the entire length...
-
PEMKO 7" Half Saddle/Offset Saddle Threshold No. 2727
Half Saddle/Offset Saddle thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length....
