Exception: Where compliance is not operationally or structurally feasible, ramps, bridge plates, or similar devices complying with the applicable requirements of 36 CFR 1192.83(c) shall...
Search Results "Ramp Width"
Filters
Commonly Searched Documents
-
11B-1002.4.3 Gaps
-
206.2.1 Site Arrival Points
(1) Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at any intersection having curbs or other barriers to entry from a street...
-
References
Changes in level exceeding ½ inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps). 303.4 Ramps....
-
1. Measuring Tape
A metal measuring tape is an essential tool for a successful survey because many of the accessibility requirements concern the width, height, or depth of various features....
-
1015.3 Viewing Space
The viewing space shall be 32 inches (815 mm) maximum and 51 inches (1295 mm) minimum high above the ground and shall extend the full width of the clear ground space....
-
Inclined Wheelchair Lifts
Codes generally prohibit inclined lifts from reducing the required width of egress routes. The ASME standard allows inclined lifts with enclosures and those without....
-
9.4 POST OFFICE BOXES
Aisles between post office boxes shall be a minimum of 66 in (1675 mm) clear width....
-
1015.3 Viewing Space
The viewing space shall be 32 inches (815 mm) maximum and 51 inches (1295 mm) minimum high above the ground and shall extend the full width of the clear ground space....
-
11B-404.2.4 Maneuvering clearances
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance. Exception: Reserved....
-
§ 38.97(a)
The diameter or width of the gripping surface of interior handrails and stanchions shall be 11/4 inches to 11/2 inches or shall provide an equivalent gripping surface....
-
§ 38.115(a)
The diameter or width of the gripping surface of interior handrails and stanchions shall be 11/4 inches to 11/2 inches or shall provide an equivalent gripping surface....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Pole-supported pedestrian traffic control buttons shall be identified with color coding consisting of a textured horizontal yellow band 2 inches (51 mm) in width encircling the pole, and...
-
11B-404.2.4 Maneuvering clearances
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance. Exception: Reserved....
-
Handrails, Grab Bars, and Tub and Shower Seats [4.26]
Handrails, Grab Bars, and Tub and Shower Seats [4.26] ADAAG 4.26 provides technical requirements for: handrails at ramps [4.8] and stairs [4.9] grab bars at water closets...
-
12. Annual Commitment for Program Access Improvements
; (h) Widening of pedestrian rights of way and sections thereof to provide 4 feet of accessible width; (i) Providing 4 feet of clearance to the entrances of public bus shelters;...
-
2. Redressability
With regard to curb ramps, Kirola seeks an injunction requiring the City to, within ten years of judgment, construct an accessible curb ramp at every existing or potential curb ramp location...
-
Accessible Drop-Off and Pick-Up Areas
Curb ramps must be provided if the drop-off area is next to a curb....
-
Pemko 193 Slip resistance
By slip resistance I am assuming it will meet the coefficient of friction requirement of 0.8 if installed on a ramp. Thank you -Brian...
-
R309.5.1 Location
Locating parking meters at the head or foot of the parking space permits deployment of a van side-lift or ramp or the vehicle occupant to transfer to a wheelchair or scooter....
-
Special Technical Provisions for Alterations to Existing Buildings and Facilities [4.1.6(3)]
Section 4.1.6(3) recognizes certain allowances where technical feasibility is encountered, such as steeper slopes for short ramps....
-
Readily Achievable Barrier Removal
Readily achievable barrier removal may include providing an accessible route from a parking lot to the business’s entrance, installing an entrance ramp, widening a doorway, installing accessible...
-
What materials may satisfy ADAAG requirements?
there is a choice between flooring materials otherwise suitable for a particular application, we recommend choosing the material with the higher coefficient of friction, particularly for ramps...
-
Harmar CPL800H-1400H Hydraulic CPL with Modular Tower
Options: Automatic door openers, key switch, auto folding ramp, 90-degree platform, platform gate, custom colors, Coastal finish. Warranty: 2 Year Parts / 1 Year Outdoor Units...
-
11B-235.2.1 Dispersion
The term "boat slip" is intended to cover any pier area other than launch ramp boarding piers where recreational boats are moored for purposes of berthing, embarking, or disembarking....
