(a) If existing elements, spaces, essential features, or common areas are altered, then each such altered element, space, feature, or area shall comply with the applicable provisions of...
Search Results "Lavatory Clear Floor Space"
-
4.1.6(1)(a)
-
Knowing audio description is present in the exhibition
A difference in floor texture could be used to cue visitors with vision loss where the panels with description buttons are located....
-
Audible Tones/Bells or Verbal Annunciators
...are all of the elevators equipped with audible tones/bells or verbal annunciators that designate the passage of floors?...
-
Executive Summary
Key requirements apply to clear floor area, reach limits, knee and toe clearances and maneuvering clearances....
-
1.1.16 Alternate measurement tools
Waviness index may be a more appropriate measure to include if floor profilers are used....
-
Fair Labor Standards Act Section 14(c)
At the time, the floor is set at 75 percent of the national minimum wage. In 1966, it is lowered to 50 percent....
-
9. Remedial action
Paragraph (a)(3) also makes clear that handicapped persons who are not in the program at the time that remedial action is required to be taken may also be the subject of such remedial action...
- Stanley Access Technologies Dura-Care 7200 Manual Sliding Door
-
§ 38.113(d)(4) Exception
Retrofitted vehicles shall be coordinated with the platform in existing stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under...
-
M20
Is there a horizontal grab bar at least 36 inches long securely mounted behind the toilet 33 to 36 inches above the floor with one end no more than 6 inches from the side wall?...
-
603.4 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor. [ECTCR UFAS 4.25.3, Fig. 38]...
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4 _|Alterations; Path...
-
§382.9(d)
provision of this part, and that the carrier has provided an effective alternative means of achieving the objective of the provisions of this part subject to the waiver or have demonstrated by clear...
-
Some existing measurement protocols
Some existing measurement protocols Currently there are no generally accepted measurement protocols for determining the slope, flatness, or waviness of floor surfaces in terms of accessibility...
-
H14
all built-in dispensers, receptacles, or equipment mounted so the front does not extend more than 4 inches from the wall if the bottom edge is between 27 inches and 80 inches above the floor...
-
AUTOMATIC DOOR
The switch that begins the automatic cycle may be a photoelectric device, floor mat, or manual switch mounted on or near the door itself (see power-assisted door)....
-
804.3.2 Height
The kitchen work surface shall be 34 inches (865 mm) maximum above the finish floor or ground....
-
7.2 SERVICE COUNTERS
distribution of goods to the public, an auxiliary counter or a portion of the main counter shall be provided with a maximum height of between 28 in to 34 in (710 mm to 865 mm) above the floor...
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
§ 36.406(f)(2)
(2) In assembly areas that are required to horizontally disperse wheelchair spaces and companion seats by section 221.2.3.1 of the 2010 Standards and that have seating encircling, in whole...
-
Joint Use
Interior or exterior rooms, spaces, or elements that are common space available for use by all occupants of the building....
- Neo-Metro Commercial Metaal Toilet 8956 Series
- Pressalit Care VALUE Support Arm Fixed Height Swing Grab Bar with Leg
- Panda S.12 Solid Wood Lift & Slide System


