The Sesame retracting stairs are the foundation of the Sesame System with the main objective of providing pedestrian and wheelchair access to a building all in one given space. When...
Search Results "Vertical Reference Plane"
Filters
Commonly Searched Documents
-
Sesame Retractable Stairs with Lift
-
M305.3.1 Length (Section-by-Section Analysis)
For vertical standing supports, the MDE NPRM proposed a gripping surface length of 18 inches minimum....
-
11B-204.1 General
Within play areas, protruding objects on circulation paths shall not be required to comply with Section 11B-307 provided that ground level accessible routes provide vertical clearance in...
-
11B-204.1 General
Within play areas, protruding objects on circulation paths shall not be required to comply with Section 11B-307 provided that ground level accessible routes provide vertical clearance in...
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADA Standards] 303.2 Vertical....
-
M305.3.1 Length
support gripping surfaces shall comply with M305.3.1.1, horizontal standing support gripping surfaces on diagnostic equipment containing a wheelchair space shall comply with M305.3.1.2 and, vertical...
-
Section B: Passenger Drop-Off Area
(§503.4) B3 Is there vertical clearance of at least 114" (9 feet 6 inches) from the site entrance to the vehicle pull-up area, in the access aisle...
-
Van-Accessible Parking Spaces
parking spaces are the same as accessible parking spaces for cars except for three features needed for vans: a wider access aisle (96") to accommodate a wheelchair lift; vertical...
-
Parking
and access aisles. 11B-502.4 Identification at accessible spaces and/or lot entrances. 11B-502.6 11B-502.8 Vertical...
-
Parking
and access aisles. 11B-502.4 Identification at accessible spaces and/or lot entrances. 11B-502.6 11B-502.8 Vertical...
-
Do the exceptions for accessible routes between stories apply to facilities that are only partially occupied by entities not permitted the exception, such as health care facility or shopping center?
Accessible routes between stories are not required in private sector facilities that are either less than 3 stories or that have less than 3,000 square feet per story excluding the...
-
Ascension Protege Portable Wheelchair Lift 5442P
The latest product offering from Ascension will open customers to a lower price point, while retaining the superior quality and performance only available from an Ascension lift. The...
-
4.1.2(5)(b)
The vertical clearance at such spaces shall comply with 4.6.5. All such spaces may be grouped on one level of a parking structure....
-
Scenario 8 – Accessibility
Ayana recently enrolled in a school that does not have an elevator. The school was built in the early 1960s and, due to limited resources, the district has never altered the...
-
Federal Elevator Systems, Inc. Showroom
Are you considering purchasing an elevator from us? Visit our Showroom to see all of the finishing options available to you and to ride the functioning elevators. Send us a message...
-
Ascension 5442P Protege Chapter 2 Setup Operations and Performance Demonstration Video
Chapter 2: A Setup Operations and Performance of the Ascension 5442 Protege Demonstration Video
-
Multi-Story Buildings and Facilities: ADA Standard Section 206.2.3
Section 206.2.3 covers the scoping requirements in the most current ADA Standards for accessible routes within multi-story buildings and facilities
-
Additional Features of Van-Accessible Parking Spaces
page and require the following additional features: a "van accessible" designation on the sign; different widths for the van parking space or the access aisle; and at least 98 inches of vertical...
-
Accessible Parking Spaces [§502]
Accessible Parking Spaces [§502] Requirements for accessible parking spaces address the size and marking of regular and van spaces and access aisles, surfaces, vertical clearance at van...
-
210 Stairways
What’s New/Different 4.1.3(4) Interior and exterior stairs connecting levels that are not connected by an elevator, ramp, or other accessible means of vertical...
-
Bobrick 18" Straight Grab Bar Peened B-6806.99 x 18
18" (455mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...
-
Bobrick 18" Straight Grab Bar B-5806 x 18
18" (455mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick 18" Straight Grab Bar Peened B-5806.99 x 18
18" (455mm) long, 1-1/4" (32mm) dia. tubing , peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick 18" Straight Grab Bar B-6806 x 18
18" (455mm) long, 1-1/2" (38mm)dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
