Comparison of Single-User Toilet Room “Pairs” With Fixtures Side-by-Side: Plan 2C 2010 Standards Plan-2C Pair: 2010 Standards with In-Swinging Doors...
Search Results "Proposed Standard"
Filters
Commonly Searched Documents
-
Comparison of Single-User Toilet Room “Pairs” With Fixtures Side-by-Side: Plan 2C
-
IS ASSISTANCE REQUIRED?
Once notified, many people who are deaf or hard of hearing can read and follow standard exit and directional signs and use any standard means of egress from the building....
-
Sell-outs in specific seating areas. (Section-by-Section Analysis)
Under the second option, § 35.138(f)(2), a facility could release unsold accessible seating in a specific seating area once all of the standard seats in that location were sold out. ...
-
12204(c)(3) Other sites
under State or local law, the guidelines described in paragraph (1) shall establish procedures equivalent to those established by 4.1.7(1)(b) and (c) of the Uniform Federal Accessibility Standards...
-
§ 36.304(d)(2)(ii)(B)
(B) On or after March 15, 2012, elements in existing facilities that do not comply with the corresponding technical and scoping specifications for those elements in the 1991 Standards must...
-
Additions [§202.2]
Projects that increase, expand, or extend a facility’s gross floor area or height of a facility are considered additions (as defined in §106.5) and must comply with the requirements of the standards...
-
§ 35.151(f)(1)
suites and clustered sleeping rooms) or on floors containing accessible sleeping rooms with mobility features shall provide turning spaces that comply with section 809.2.2 of the 2010 Standards...
-
General: ADA Standard Section 207.1
Section 207.1 of the ADA Standards covers information on scoping requirements for accessible means of egress in the most current ADA Standards.
-
III-4.4400 Continuing obligation
The obligation to remove barriers will never exceed the level of access required under the alterations standard (or the new construction standard if ADAAG does not provide specific standards...
-
Equivalent Facilitation [§103]
For example, the ADA Standards specify permanent or built-in features for independent access....
-
3. Element-by-Element Safe Harbor
The rule includes a general "safe harbor" under which elements in covered facilities that were built or altered in compliance with the 1991 Standards would not be required to be brought...
-
Lawn Seating
The 1991 Standards, at section 4.1.1(1), require all areas of newly constructed facilities to be accessible, but do not contain a specific scoping requirement for lawn seating in assembly...
-
F103 Modifications and Waivers
The ABA recognizes a process under which covered entities may request a modification or waiver of the applicable standard....
-
ADA Information Line
Detailed requirements can be found in the ADA Standards for Accessible Design....
-
C.8 - Are Section 508 access requirements satisfied if the agency provides such access following a request for it, as opposed to in anticipation of a request for access?
The requirements of Section 1194.24 (c) and (d) of the Access Board's standards are to be met at the time the product is developed or, in the case of a procurement, when the product is delivered...
-
§ 36.406(e)(3)
basis exclusively to graduate students or faculty and do not contain any public use or common use areas available for educational programming, are not subject to the transient lodging standards...
-
E101.1 Purpose
These 508 Standards, which consist of 508 Chapters 1 and 2 (Appendix A), along with Chapters 3 through 6 (Appendix C), contain scoping and technical requirements for information and communication...
-
Special Provisions for Alterations
The standards apply the same requirements used in new construction to alterations but also include provisions unique to alterations....
-
§ 35.151(f)(3)
basis exclusively to graduate students or faculty, and do not contain any public use or common use areas available for educational programming, are not subject to the transient lodging standards...
-
§ 35.151(k)(1)
(1) New construction of jails, prisons, and other detention and correctional facilities shall comply with the 2010 Standards except that public entities shall provide accessible mobility...
-
Q6.) How important is the method of measurement in considering the tolerances allowable in finished construction?
The industry’s standards are usually very clear about how to make their measurements. Unfortunately, where no standards exist, the methods are subject to interpretation and argument. ...
-
16. If a play surface is replaced with an accessible surface and the existing ground level play components are not accessible, do the components need to be replaced?
involves the surfacing, only the surface along accessible routes, clear floor or ground spaces, and maneuvering spaces must comply with the ASTM F 1951-99 (wheelchair maneuverability) standard...
-
I. Public Toilet Rooms
and common use toilet rooms throughout the Hotel and the Tower, Defendants will provide at least one lavatory with a counter-top that is 34 inches above the finish floor surface. 2010 Standards...