Facilities with Firing Positions Sections 243 and 1010 of the 2010 Standards require an accessible turning space for each different type of firing position at a shooting facility if designed...
Search Results "Designed Theaters"
Filters
Commonly Searched Documents
-
243 Shooting Facilities with Firing Positions
-
GSA
General Services Administration, acting by or through the Administrator of General Services, or a designated official to whom functions under this part have been delegated by the Administrator...
-
Use Zone
Use Zone - The ground level area beneath and immediately adjacent to a play structure or piece of equipment that is designated by ASTM F 1487 Standard Consumer Safety Performance Specification...
-
502.7 Relationship to Accessible Routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
12183(a)(1)
(1) a failure to design and construct facilities for first occupancy later than 30 months after July 26, 1990, that are readily accessible to and usable by individuals with disabilities,...
-
12204(c)(3) Other sites
(3) Other sites With respect to alterations of buildings or facilities designated as historic under State or local law, the guidelines described in paragraph (1) shall establish procedures...
-
The Facilities Toolbox
The "Facilities Toolbox" is an interactive Forest Service facility management Web site designed to help line officers and their staffs manage facilities effectively....
-
4.1.3(14)
Emergency warning systems in medical care facilities may be modified to suit standard health care alarm design practice....
-
Problem Three
Provide a sign designating each accessible parking space....
-
A4.10.6 Door Protective and Reopening Device
However, if designed in accordance with ASME A17.1‒1990, the door closing movement could still be stopped if a person or object exerts sufficient force at any point on the door edge....
-
R103.1 Conventional Industry Tolerances
Conventional industry tolerances do not apply to design work....
-
§100.205(e)(2)(vi) 2006 International Building Code
2007, erratum to correct the text missing from Section 1107.7.5, if adopted without modification and without waiver of any of the provisions intended to address the Fair Housing Act's design...
-
A4.10.6 DOOR PROTECTIVE AND REOPENING DEVICE
However, if designed in accordance with ANSI A17.1-1978, the door closing movement could still be stopped if a person or object exerts sufficient force at any point on the door edge....
-
Introduction
people who are blind or have low vision when they visit exhibits, museums, park, zoos, and other cultural venues; surveys appropriate situational applications of technology in exhibit design...
-
4.21.3 Seat
Seats are only required in transfer showers, which were not used in any of the designs reviewed....
-
How is “technical infeasibility” determined in an alteration?
The term, as defined in the standards (§106), is intended to encompass design, site, engineering or other constraints that prohibit compliance....
-
Using the ADA Standards
The design standards issued under the Americans with Disabilities Act (ADA) by the Department of Justice and the Department of Transportation are used to ensure access to the built environment...
-
Can platform lifts be portable or provided after construction as an adaptation?
Platform lifts can be provided after construction only to provide access to raised work stations in courtrooms (sufficient space and electrical service must be provided in design to facilitate...
-
Can ramps be portable or provided after construction as an adaptation?
Ramps can be provided after construction only to provide access to raised work stations in courtrooms (sufficient space must be provided in design to facilitate installation)....
-
11B-703.2 Raised characters
Signs that are designed to be read by touch should not have sharp or abrasive edges....
-
Transportation Vehicles: ADA Standard Section 8.
This provides information on the revisions to the ADA Standards regarding transportation vehicles.
-
Turning Space: ADA Standard Section 809.2.2
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
1009.8 Two-way communication
Two-way communication systems are not required at the landings serving only service elevators that are not designated as part of the accessible means of egress or serve as part of the required...
-
11B-1008.2.3 Water play components
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs....