A seat in a standard roll-in shower compartment shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point within...
Search Results "Patient in Side-Lying Position"
Commonly Searched Documents
-
11B-610.3 Shower compartment seats
-
Shower/Tub Seat Mounting Location
If the seat is in the down position, it does put the user closer to the shower and water controls while using the shower, but if someone is standing in the shower the seat obstructs the...
-
G. Reporting
Agreement, including but not limited to: The information required in Auxiliary Aid and Service Log described in Paragraph 29; The number of complaints received by MSHA from Patients...
- Bobrick Swing-Up Grab Bar B-4998
-
Accessible Routes: ADA Standard Section 1002.2
Steeper slopes are permitted on accessible routes connecting the amusement ride in the load and unload position where it is “structurally or operationally infeasible.”...
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
(2) Adjustability: Minimum Low Transfer Height
These commenters asserted that the lower height would provide more accessibility, safety for both patients and healthcare providers, and allow more patients to transfer independently or...
-
e. The terms of a collective bargaining agreement
However, like a position description, the agreement would be considered along with other evidence, such as the actual duties performed by people in these jobs....
-
12112(b)(6)
individual with a disability or a class of individuals with disabilities unless the standard, test or other selection criteria, as used by the covered entity, is shown to be job-related for the position...
-
902.4.1 Clear Floor or Ground Space
A clear floor space complying with 305 positioned for forward approach shall be provided....
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
902.4 Dining Surfaces and Work Surfaces for Children's Use
Dining surfaces and work surfaces that are used primarily by children 5 years and younger shall not be required to comply with 902.4 where a clear floor or ground space complying with 305 positioned...
-
902.4 Dining Surfaces and Work Surfaces for Children's Use
Dining surfaces and work surfaces that are used primarily by children 5 years and younger shall not be required to comply with 902.4 where a clear floor or ground space complying with 305 positioned...
-
7(2)(b)(i)
(i) Where the door swings into the bathroom, there is a clear space (approximately, 2' 6" by 4'0") within the room to position a wheelchair or other mobility aid clear of the path of the...
-
1009.2.4 Seat Height
lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load) position...
-
12112(b)(6)
individual with a disability or a class of individuals with disabilities unless the standard, test or other selection criteria, as used by the covered entity, is shown to be job-related for the position...
- HealthBridges
-
11B-1009.2.7 Operation
This will permit a person to call the pool lift when the pool lift is in the opposite position....
-
CONTENTS
Current Situation: The Vast Majority of Examination and Procedures Tables Are 32 Inches High Implication of a 19-Inch minimum standard for the highest point in the lowest adjustable position...
-
4.20.4 Grab Bars
Nonetheless, in both conditions, grab bars are located to help individuals get into the tub and then to lower and raise themselves to and from a seated position....
-
11B-1009.2.7 Operation
This will permit a person to call the pool lift when the pool lift is in the opposite position....
-
305.7 Maneuvering Clearance
Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with 305.7.1...
-
305.7 Maneuvering Clearance
Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with 305.7.1...
-
R304.5.1 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 1.2 m (4.0 ft) minimum....