Vertical, center, or side aisles adjoining bleacher seating that are stepped or tiered are not considered entry points. ◼ Advisory 11B-221.2.3.2 Vertical dispersion Exception 2....
Search Results "Side Reach"
-
11B-221.2.3.2 Vertical dispersion
-
11B-404.1 General
A sign visible from the approach side complying with Section 11B-703.5 shall be posted stating “Entry restricted and controlled by security personnel”....
-
11B-221.2.3.2 Vertical dispersion
Vertical, center, or side aisles adjoining bleacher seating that are stepped or tiered are not considered entry points. ◼ Advisory 11B-221.2.3.2 Vertical dispersion Exception 2....
-
Section H: Lifts
If a side door/gate is provided, is the clear opening width at least 42"? (§410.6) ...
-
406.7 Islands
Raised islands in crossings shall be cut through level with the street or have curb ramps at both sides....
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
Entry Points and Seats
Consider design features like open sides, back supports, and hand supports (right) to help facilitate easy transfer and access....
-
1003.2.12.2 Opening limitations
Exception: The triangular opening formed by the riser, tread and bottom rail at the open side of a stairway shall be of a maximum size such that a sphere of 6 inches (152mm) in diameter...
-
Clear Deck Space
This space must be located on the side of the seat opposite the water. The slope of the clear deck space must not be greater than 1:48 (2%)....
-
R305.1.4 Size
At curb ramps and blended transitions, detectable warning surfaces shall extend the full width of the ramp run (excluding any flared sides), blended transition, or turning space....
-
704.11.1 Parapet construction
Parapets shall have the same fire-resistance rating as that required for the supporting wall, and on any side adjacent to a roof surface, shall have noncombustible faces for the uppermost...
-
General [9.1.1]
Where room numbers are provided, they must be raised and Brailled and located on the wall at the latch-sides of doors for safety and uniformity....
-
Van-Accessible Parking Spaces
(illustration showing a van with a side-mounted wheelchair lift lowered onto a marked access aisle at a van-accessible parking space....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
- Hager Companies Plastic International Symbol 364M
- Hager Companies Plastic International Symbol 364S
- Bradley 2-Stall Seat Cover/Tissue Dispenser & Napkin Disposal 5911
-
Vanity Counter Tops
The proposed rule also applied requirements for reach ranges and operable parts (sections 308 and 309) which would have effectively required knee and toe clearances below the vanities....
-
E203.2 Agency Business Needs (Section-by-Section Analysis)
procure, develop, maintain or use ICT, they must identify the business needs of individuals with disabilities affecting vision, hearing, color perception, speech, dexterity, strength, or reach...
-
11B-707.4 Privacy
In addition to people who are blind or visually impaired, people with limited reach who use wheelchairs or have short stature, who cannot effectively block the ATM screen with their bodies...
-
What Assistance Will the Person(s) Provide?
Agreement should be reached regarding how long the person giving assistance is expected to wait for the first responders to arrive....
-
T503 Passenger Access Routes
See 36 CFR 1192.23(a) (“All [covered] vehicles . . . shall provide . . . sufficient clearances to permit a wheelchair or other mobility aid user to reach a securement location.”), 1192.159...