removal or alteration of a load-bearing member that is an essential part of the structural frame, or because other existing physical or site constraints prohibit modification or addition of elements...
Search Results "Pedestrian Elements"
Filters
Commonly Searched Documents
-
TECHNICALLY INFEASIBLE
-
11B-404.2.4.3 Recessed doors and gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
Time periods
walkway, and all newly constructed or altered street level pedestrian walkways must have curb ramps or other sloped areas at intersections to streets, roads, or highways....
-
(1) Site impracticality
The first test is an individual building test which involves a two-step process: measurement of the slope of the undisturbed site between the planned entrance and all vehicular or pedestrian...
-
11B-202 Existing buildings and facilities
For purposes of this section, the adjusted construction cost of alterations, structural repairs or additions shall not include the cost of alterations to path of travel elements required...
-
Effective date: Triggering event. (Section-by-Section Analysis)
Specifically, the current title III triggering events are ill-suited for application to many elements of golf and miniature golf sites, amusement rides and attractions, playgrounds, park...
-
202.5 Alterations to Qualified Historic Buildings and Facilities
toilet facilities would threaten or destroy the historic significance of the building or facility, the exceptions for alterations to qualified historic buildings or facilities for that element...
-
205.1 General
Operable parts on accessible elements, accessible routes, and in accessible rooms and spaces shall comply with 309. EXCEPTIONS: 1....
-
1.5 Accessible Route Requirements for Campus Settings
• Path of travel (POT) upgrades only apply to existing construction; any new POT elements or accessible routes being provided as part of the basic project scope are not considered path...
-
R402.3 Post-Mounted Objects
Where objects are mounted on free-standing posts or pylons and the objects are 685 mm (2.25 ft) minimum and 2030 mm (6.7 ft) maximum above the finish surface, the objects shall overhang pedestrian...
-
Selection of Participants
Selection of Participants The principal investigators at OSU were to pilot test the survey instruments with professional contacts in parks and recreation that manage pedestrian trails...
-
4.7.10 DIAGONAL CURB RAMPS
If diagonal (or corner type) curb ramps have returned curbs or other well-defined edges, such edges shall be parallel to the direction of pedestrian flow....
-
§100.205(e)(2)(v) 2003 International Building Code (IBC)
the 2003 IBC stating, “ICC interprets Section 1104.1, and specifically, the Exception to Section 1104.1, to be read together with Section 1107.4, and that the Code requires an accessible pedestrian...
-
1.1.8 Alternate measurement tools
If the F - number system is used pedestrian paths should have a minimum FF of 25. Running slope should be measured along the same lines of measurements as given in Section 1.1.3....
-
1.1.7 Measurement of parking areas
These areas should be considered as a pedestrian walk with a minimum width of 60 in. and a length of approximately 20 ft and with an ADA/ABA - AG maximum slope of 1:48 in both directions...
-
TECHNICALLY INFEASIBLE
removal or alteration of a load-bearing member that is an essential part of the structural frame, or because other existing physical or site constraints prohibit modification or addition of elements...
-
Accessible Work Surfaces
These guidelines generally do not require elements of a work station to be accessible....
-
Surprise Drills
These drills should include some realistic elements (e.g., blocked paths or exits), forcing people to use alternative routes. ...
-
New Construction and Additions [4.1.2 and 4.1.3]
Sections 4.1.2 and 4.1.3 indicate which areas or elements of exterior sites and buildings are required to meet ADAAG's technical criteria in new construction....
-
4.1.5 Accessible Buildings: Additions
Each space or element added to the existing building or facility shall comply with the applicable provisions of 4.1.1 to 4.1.3, Minimum Requirements (for New Construction) and the applicable...
-
Recessed Doors and Gates [§404.2.4.3]
Recessed Doors and Gates [§404.2.4.3] Thick walls, casework, shelving, columns and other elements can cause doors or gates to be recessed....
-
Handrails [ADA Standards §504.6, §505]
The gripping surface and adjacent surfaces must be free of abrasive or sharp elements. Handrails cannot rotate within fittings....
-
Morgan’s Inspiration Island - San Antonio, Texas
Morgan’s Inspiration Island element is wheelchair-accessible. ...
