Additionally, the study participants who made the two-step transfers appear more able on these transfers when comparing the heights achieved during the two-step transfers to the heights...
Search Results "Character Height (Raised)"
-
Two Step Transfer Evaluation
-
5.8.2 Knee and Toe Clearance Recommendations under Breast Platform Recommendations
Toe clearance shall be provided at a height of 9 inches above the floor to a depth of 6 inches maximum. M303.2.4.2 Knee Clearance....
-
B7-b
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for each 12 inches of length....
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and ¾ inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)....
-
The Spa Lift Elite™ Pool & Spa Access Lift
The ADA Compliant, UL Certified, Spa Elite™ Lift was designed to provide access to raised pools and spas with walls from 21 inches to 68 inches high....
-
808.3 Clear Floor Space
EXCEPTION: In alterations, wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these...
-
808.3 Clear Floor Space
EXCEPTION: In alterations, wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these...
-
1(2)(b) Site impracticality due to unusual characteristics
floodplain or coastal high-hazard area and sites subject to other similar requirements of law or code that the lowest floor or the lowest structural member of the lowest floor must be raised...
-
Detail
This observation is notable as it contrasts with a general principle in raised line graphic production of keeping graphics simple and free of extraneous detail....
-
Shower Compartments
Commenters raised concerns that adding a new exception that permits a 2-inch maximum curb in transfer-type showers in alterations to existing facilities, where recessing the compartment...
-
§ 1194.25(j)(3)
(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor....
-
e-ii
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for 12 inches of horizontal distance....
-
Federal Elevator 360 Passenger Elevator
Standard Features: The 360 offers the following standard options: 96" cab height Choose from 2000, 2500, 3000 or 3500 lbs. rated loads Choose from 100, 125, or...
-
H. Chapter 7: Communication Features
Chapter 7 in the 2016 Non-Rail Vehicle Guidelines establishes technical requirements for characters on signs, the International Symbol of Accessibility, and vehicular announcement systems...
-
Overview of FSTAG Implementation Process
trail design complies with the technical requirements to the extent practicable, help you document how and where the technical requirements can, or cannot, be applied, and confirm that the character...
-
Guldmann GLS5 Active lifter
GLS5 Active lifter is an easy, comfortable and safe way to raise and support patients with partial or complete control of upper body....
-
11B-203.6 Single occupant structures
Single occupant structures accessed only by passageways below grade or elevated above standard curb height, including but not limited to, toll booths that are accessed only by underground...
-
F203.7 Single Occupant Structures
Single occupant structures accessed only by passageways below grade or elevated above standard curb height, including but not limited to, toll booths that are accessed only by underground...
-
M303.3.3.1 Running Slope
EXCEPTION: A running slope not steeper than 1:8 shall be permitted for ramp runs with a maximum height of 2 ½ inches (64 mm)....
-
203.6 Single Occupant Structures
Single occupant structures accessed only by passageways below grade or elevated above standard curb height, including but not limited to, toll booths that are accessed only by underground...
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and 3/4 inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)...
-
8.5 Stacks
Shelf height in stack areas is unrestricted (see Fig. 56)....
-
8.5 STACKS
Shelf height in stack areas is unrestricted (see Fig. 56)....
-
11B-203.6 Single occupant structures
Single occupant structures accessed only by passageways below grade or elevated above standard curb height, including but not limited to, toll booths that are accessed only by underground...
