and alarm buttons, emergency manual lowering, safety brakes Standard two-stop operation can be increased to up to 5 stops over a maximum of 300" (762 cm)* Configurable for one door...
Search Results "Door Stop"
Filters
Commonly Searched Documents
-
Savaria Orion Limited Use/Limited Application Elevator
-
11B-611.3 Operable parts
Operable parts, including doors, lint screens, and detergent and bleach compartments shall comply with Section 11B-309....
-
5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations
Not all mobility devices stop immediately when braking to stop....
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
-
Section 2. Vehicular or pedestrian arrival points
"Vehicular or pedestrian arrival points" means public or resident parking areas, public transportation stops, passenger loading zones, and public streets or sidewalks....
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
Which transition type do users with disabilities prefer?
My preferences are: E - gives the safest spot for me to stop and make a turn. D C B A...
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a of 1/2 inch (13 mm) under rated loading to zero loading conditions....
-
§ 37.42(c)(4)
(4) Mini-high platforms, with multiple mini-high platforms or multiple train stops, as needed, to permit access to all accessible cars available at that station; or...
-
§ 37.42(c)(4)
(4) Mini-high platforms, with multiple mini-high platforms or multiple train stops, as needed, to permit access to all accessible cars available at that station; or...
-
Primary Function
., in highway rest stops. 35.151(b)(4)(i)(A)] ...
-
Bus Loading Zones: ADA Standard Section 209.2.2
Section 209.2.2 covers scoping requirements in the current ADA Standards for bus loading zones.
-
What distinguishes passenger loading zones from bus loading zones?
designated or specified public transportation as defined by DOT’s ADA regulations, including charter service, which are subject to criteria for bus loading zones (§209.2.2) or on-street-bus stops...
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
-
382.91 What assistance must carriers provide to passengers with a disability in moving within the terminal?
One addition concerns enroute stops at the entrance to a rest room....
-
DOT Response to Comments
Thus, achieving the objective of providing origin-to-destination service does not require entities to make door-to-door service their basic mode of service provision....
-
Activar JL Industries Ambassador Series 1017F10 Steel Fire Extinguisher Cabinets
Door and Trim Construction: Cold rolled steel with white powder-coat finish standard. ...
-
Elvoron LU/LA - Limited Use / Limited Application Hydraulic Elevator
colors Choice of three car and wall fixture colors 1:2 Cable Hydraulic Drive Quiet submersed pump and motor Two speed hydraulic valve for smooth start and stop...
-
Re: 405 Ramps
A ramp with a direction change requires a 60" x 60" minimum intermediate landing, which isn't just a turning space but also a place for stopping to allow for a turn....
-
R305.1.4 Size
At boarding and alighting areas at sidewalk or street level transit stops for rail vehicles, detectable warning surfaces shall extend the full length of the transit stop....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
