Description (Formerly model B-5167) Satin-finish. All components welded construction with concealed screw attached on 20-gauge (0.9mm) stainless steel wall plate.
Search Results "Surface Slope"
-
Gamco Surface-Mounted Towel Pin Satin - 76777
-
Bobrick Surface-Mounted Towel Pin B-677
Bright-polished stainless steel. Flange is 2" x 2" (50 x 50mm). Projects 3 3⁄8" (85mm) from wall.
-
Bobrick Surface-Mounted Medicine Cabinet B-297
All-steel cabinet and two fixed shelves with baked white enamel finish. Mirror: No. 1 quality, 1⁄8" (3mm) glass electrolytically copper-plated. Door has enameled steel piano-hinge...
-
AJW Architectural Products US54 Collapsable Security Hook Strip & Shelf 18"L, 4 Hooks, Exposed Mounting - Surface Mounted
Six (6) exposed mounting points secure unit to wall surface....
-
1118B.4
Surfaces for wheelchair spaces. Clear floor or ground spaces for wheelchairs shall comply with Section 1124B Ground and Floor Surfaces....
-
3. Terminology
Discussion—Elevation measurements may be taken statically, as with rod and level per Test Method E1364 or dynamically using a rolling inclinometer per Test Method E2133. 3.1.1.2 traveled surface...
-
Selection of Methodology
stabilizer, etc.) information (product type, manufacturer name, warranty/guarantees’ information, and similar data) SECTION #3 Trail pre‐installation specifications (soil type/composition, slope...
-
11B-705.1.1.3.2
Detectable warning surfaces shall provide a 70 percent minimum visual contrast with adjacent walking surfaces....
-
11B-705.1.1.3.2
Detectable warning surfaces shall provide a 70 percent minimum visual contrast with adjacent walking surfaces....
-
Start of Play: ADA Standard Section 1007.3.1
A clear floor or ground space 48 inches (1220 mm) minimum by 60 inches (1525 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
11B-1007.3.1 Start of play
A clear floor or ground space 48 inches (1219 mm) minimum by 60 inches (1524 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
11B-1007.3.1 Start of play
A clear floor or ground space 48 inches (1219 mm) minimum by 60 inches (1524 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
Scoping [4.1.2(1), 4.1.3(1)] and Location [4.3.2]
Clear width, surface texture, running and cross slope, and the treatment of changes in level help determine the usability of walking surfaces by people with mobility impairments....
-
Purpose of the project
For instance, when this project began, tolerances for the measurement of the slope, flatness, and smoothness of exterior walking and rolling surfaces in concrete, asphalt, unit masonry,...
-
AJW Architectural Products US53 Collapsable Security Hook Strip & Shelf 18"L, 4 Hooks, Chase Mounting - Surface Mounted
Six (6) concealed mounting points secure unit to wall surface....
-
Will CALGreen be amended to require that some parking spaces are designed so that they can comply with Chapter 11B requirements when converted to EV charging spaces (i.e. slope, vertical clearance, path of travel)?
provide an electrical raceway to the service panel, and provide adequate capacity at the service panel for future EVCS; good design practice would be to incorporate appropriate ground surfaces...
-
Boarding Pier Clearances: ADA Standard Section 1003.3.2
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....
-
Seats
The deck surface between the centerline of the seat and the pool edge cannot have a slope greater than 1:48....
-
Landings [4.8.4]
Landings must be at least as wide as the ramp they serve and cannot slope more than 2% in any direction. Where ramps change direction, the landing must be at least 60 by 60 inches....
-
Stairs
At the top, the extension shall be parallel with the floor or ground surface....
-
11B-406.5.3 Landings
The slope of the landing in all directions shall be 1:48 maximum. [2010 ADA Standards] 406.4 Landings. Landings shall be provided at the tops of curb ramps....
-
Whitehall Mfg. Ligature Resistant Solid Surface Basin
Requires the Premium User plan or above. (Login or upgrade your account!) -
Bobrick Surface-Mounted Sharp Disposal B-350169
Requires the Premium User plan or above. (Login or upgrade your account!) -
Armor-Tile Tactile Systems Surface Applied Systems
Requires the Premium User plan or above. (Login or upgrade your account!)
