Characters displayed on the screen shall be in a sans serif font. Characters shall be 3/16 inch (4.8 mm) high minimum based on the uppercase letter "I". Characters shall contrast...
Search Results "Door Height"
-
707.7.2 Characters
-
707.7.2 Characters
707.7.2 Characters. Characters displayed on the screen shall be in a sans serif font. Characters shall be 3/16 inch (4.8 mm) high minimum based on the uppercase letter "I"....
-
Allegion aptiQ Mullion and Mini-Mullion Reader Installation
Step-by-step instructions for installing the aptiQ Mullion and Mini-Mullion Reader from Ingersoll Rand Security Technologies.
-
BEA Inc. Indoor & Outdoor Door Entry Keypads
BEA’s Keypads offer field-proven reliability and cost effective solutions anywhere access control is desired. These keypads are designed for basic access or code control for up to...
-
PDQ 4200 Series Exit Device Door Hardware
The American Eagle 4200 Series is a rim or surface vertical rod exit device. FEATURES: Surface vertical rod devices feature top and bottom pullman latch bolts which are dead...
-
Guide for Home Remodeling for People with Disabilities and Special Needs: What You Need to Know
by Michael Sledd via Expertise.com: For many people, owning and maintaining a home is one of the most significant investments they ever make. But for individuals and veterans...
-
DORMA T900 Series Locks
Product features Easy to install in both wood or hollow metal doors Auxiliary support springs in levers ensure smooth operation and long life Standard door thickness ranges from...
-
Corbin Russwin Inc. TL3700 Series of tubular locks
General Information For doors 1-3⁄8" (35mm) to 1-3⁄4" (44mm) thick standard 2-3/4" (70mm) backset standard; Optional: 2-3/8" (60mm); see quick codes; page 9 Curved lip T-Strike...
-
A. Accessible Voting Program
those features of facilities and equipment (including permanent equipment such as lifts and elevators and temporary equipment such as portable ramps, traffic cones, signs, wedges, and door...
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
2.3 Restrooms
Is the entry door at least 32 inches wide?...
-
7(2)(b)(v)
The top of the fixture rim is a maximum height of 2'10" above the finished floor. If kneespace is provided below the vanity, the bottom of the apron is at least 2'3" above the floor....
-
TownSteel "H" Rose Tubular Lockset
The "H" rose is 13/32" in projection, and 2-13/16" in height. ...
-
TownSteel "S" Rose Tubular Lockset
The "S" rose is 5/32" in projection, and 2-33/64" in height. ...
-
M301.4.2 Clearance Around Base (Section-by-Section Analysis)
As described above, M301.4 does not require the 6-inch height clearance to be maintained when the equipment is lowered to the minimum low height for independent transfer as required by M301.2.1...
-
T204.3 Doorways with Level Boarding and Alighting
Doorways with level boarding and alighting shall comply with T502.3.
-
4(3)
(3) In multistory dwelling units in buildings with elevators, the story of the unit that is served by the building elevator (a) is the primary entry to the unit; (b) complies with...
-
(b) Multistory dwelling units in buildings with elevators
For multistory dwelling units in buildings with elevators, the final Guidelines specify that only the story served by the building elevator must comply with the accessible features...
-
6.14.1 Clear Width
Gate openings and openings in barriers for pedestrian passage shall provide a clear width of 36 inches (915 mm), complying with ODAAG, section 1017.3 Clear Tread Width.
-
Linnea Lever LL20
LL20 - Door Lever Finish: PSS SSS Material: Marine Grade (316) Stainless Steel *Privacy Type: Using push pin on rose *Privacy Type: Using mortise bolt and turn piece...
-
Linnea Lever LL88
LL88 - Door Lever Finish: PSS SSS Material: Marine Grade (316) Stainless Steel *Privacy Type: Using push pin on rose *Privacy Type: Using mortise bolt and turn piece...
-
Linnea Lever LL80
LL80 - Door Lever Finish: PSS SSS Material: Marine Grade (316) Stainless Steel *Privacy Type: Using push pin on rose *Privacy Type: Using mortise bolt and turn piece...
