Word Fillable Form (1.5MB) Word Non-Fillable Form (1.3MB) PDF Non-Fillable Form (0.8MB)
Search Results "Door Height"
Filters
Commonly Searched Documents
-
Priority 1: Approach & Entrance
-
Accessible Route Into and Through the Business
Maintenance List During business hours, unlock all doors at accessible entrances, even if they are not main entrances to the store....
-
San Francisco: Accessible Business Entrance Program
The San Francisco Board of Supervisors have passed Ordinance 51-16, focusing on providing accessible business entrances to enable persons with disabilities to gain greater physical...
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
Secondly, the Access Board has decided to retain the six-inch height clearance requirement but agrees with the commenters that the diagnostic equipment should not have to meet the six-inch...
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
502.6 Identification
502.6 Identification. Parking space identification signs shall include the International Symbol of Accessibility complying with 703.7.2.1. Signs identifying van parking spaces when...
-
502.6 Identification
Parking space identification signs shall include the International Symbol of Accessibility complying with 703.7.2.1. Signs identifying van parking spaces shall contain the...
-
Transfer Surface Size – M301.2.2 Supine, Prone, or Side-Lying Position
Transfer Surface Size – M301.2.2 Supine, Prone, or Side-Lying Position The issues were discussed and decided in the full committee meeting as follows: depth of 17 inches minimum...
-
502.6 Identification
Parking space identification signs shall include the International Symbol of Accessibility complying with 703.7.2.1. Signs identifying van parking spaces shall contain the...
-
11B-502.6 Identification
Parking space identification signs shall include the International Symbol of Accessibility complying with Section 11B-703.7.2.1. Signs identifying van parking spaces shall contain...
-
Benches
Ensure that all benches provided along Forest Service trails or beach access routes or at Forest Service recreation sites (other than those inside a building or in an amphitheater)...
-
502.6 Identification
Parking space identification signs shall include the International Symbol of Accessibility complying with 703.7.2.1. Signs identifying van parking spaces shall contain the...
-
11B-502.6 Identification
Parking space identification signs shall include the International Symbol of Accessibility complying with Section 11B-703.7.2.1 in white on a blue background. Signs identifying van...
-
11B-502.6 Identification
Parking space identification signs shall include the International Symbol of Accessibility complying with Section 11B-703.7.2.1 in white on a blue background. Signs identifying van...
-
BEST B.A.S.I.S.® V Door Lever Hardware with Card Reader
The B.A.S.I.S.® V System is an electronic access control system that can be programmed to meet your facilities access control needs. The system is designed to secure your facility by...
-
SDC Z7500 HiTower Pro Series Actuator Controlled Locksets
Hardwire Control with no Electric Hinge and no Wires in the Door....
-
Disability Access - Tips for the small business
California Commission on Disability Access http://www.ccda.ca.gov
-
Activar Hiawatha 5-1/2P Series Pull with Matching Push Plate
Pull plates are packed in sturdy individual boxes with all of the fasteners for thru bolt mounting on 1-3/4” doors. ...
-
Height
Height The transfer wall height must be 16 inches minimum to 19 inches maximum, measured from the deck....
-
Brinks Home Security Alwood Keyed Entry Lever
Push Pull Rotate™ the hands-full door lock from Brinks Home Security. The only door lock that opens 3 ways. Push it, pull it, or rotate it....
-
Hager Companies Security Pull P4E
Security Pull Materials: - Stainless steel Certification: - Meets ANSI A156.6 for J401 Pulls Note: - Requires reinforcing plate with an access plate and Torx screws for door edge...
-
Corbin Russwin Inc. Access 600 RNE1 Electrified Door Hardware
Latchbolt monitoring sensors with ANSI Grade 1 electromechanical lock hardware Requires only one cable run from lock to access control panel Maintains architectural integrity around the door...
-
Height
Height The mounting height of the models worked well for the participants. The models were installed at 39 inches above finished floor to the base....
-
Kawneer North America 350/500 Heavy Wall™ Entrances
Each door corner comes with a Limited Lifetime Warranty, good for the life of the door under normal use operation. ...
