There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages.
Search Results "BAR: Beach Access Route"
Commonly Searched Documents
- Methods for Placing a Slope Tool on the Surface
-
11B-606.2 Clear floor space
A parallel approach complying with Section 11B-305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars. 2. Reserved...
-
Van Accessible Parking Spaces [§502.1 - 502.5]
Van Accessible Parking Spaces [§502.1 - 502.5] At least one space for every 6 or fraction of 6 accessible spaces must be van accessible....
-
602.2 Accessibility and Compatibility Features (Section-by-Section Analysis)
602.2 Accessibility and Compatibility Features (Section-by-Section Analysis) This section provides specifications for ICT documentation in terms of accessibility and compatibility features...
-
Van Accessible Signage
The proposed rule removed a requirement that the access designation for van parking include the term "van accessible" to clarify that both car and van drivers can use such spaces, as was...
-
T201.2 Reduction in Access Prohibited
No modifications to a non-rail vehicle shall be taken that decrease, or have the effect of decreasing, the net accessibility or usability of the vehicle below the requirements of the Non-Rail...
-
810.4 Bus Signs
Bus route identification signs shall comply with 703.5.1 through 703.5.4, and 703.5.7 and 703.5.8....
-
810.4 Bus Signs
Bus route identification signs shall comply with 703.5.1 through 703.5.4, and 703.5.7 and 703.5.8....
-
Miniature Golf Facilities
Word Fillable Form (1.0MB) Word Non-Fillable Form (1.0MB) PDF Non-Fillable Form (0.5MB)
- Level Access
-
810.4 Bus Signs
Bus route identification signs shall comply with 703.5.1 through 703.5.4, and 703.5.7 and 703.5.8....
-
11B-411.2.2.2 Verbal identification
When the accessibility function button is pressed, verbal announcement of the car designation shall be provided at the elevator car entrance upon arrival....
-
203.9 Employee Work Areas
route....
-
Benches [1011.2]
A minimum of 36 by 48 inches of clear ground space must be provided near a bench, with one side of the clear space adjoining an ORAR or trail as applicable. This clear ground...
-
(3) Doors within individual dwelling units
The final Guidelines recommend that doors intended for user passage within individual dwelling units have a clear opening of at least 32 inches nominal width when the door is open 90...
-
4.1.7(1)(b) Definition
(b) Definition. A qualified historic building or facility is a building or facility that is:
-
4.7.5 Openings
Openings in surface of the clear floor or ground spaces required by section 2.0 shall not allow passage of a sphere more than 1/2 inch (13 mm) in diameter. Where possible, elongated...
-
11B-810.4 Bus signs
Bus route identification signs shall comply with Sections 11B-703.5.1 through 11B-703.5.4, and Sections 11B-703.5.7 and 11B-703.5.8....
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND FILL BUILDING ASSOCIATES, LLC, d/b/a FILL BUILDING EAST
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND FILL BUILDING ASSOCIATES, LLC, d/b/a FILL BUILDING EAST (DJ # 202-37-249)
- Inclusion Solutions Paint Marking Stick
-
12162(e)(2)(A) Failure to make readily accessible
(A) Failure to make readily accessible...
-
Section 1193.39 Prohibited reduction of accessibility, usability and ompatibility
Section 1193.39 Prohibited reduction of accessibility, usability and ompatibility Section 1193.39 provides that no change shall be undertaken which decreases or has the effect of decreasing...
- Figure 604.8.1.1 Size of Wheelchair Accessible Toilet Compartment – Drawing from the U.S. Access Board
-
502.4 Platform Accessibility Features (Section-by-Section Analysis)
502.4 Platform Accessibility Features (Section-by-Section Analysis) This section addresses specifications for capabilities that users with disabilities have come to expect as core accessibility...