In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
Search Results "ALI: Automatic Location Identification"
-
608.5.2 Standard Roll-In Type Shower Compartments
-
608.3 Grab Bars
Grab bars shall not be required to be installed in a shower located in a bathing facility for a single occupant accessed only through a private office, and not for common use or public use...
-
608.3 Grab Bars
Grab bars shall not be required to be installed in a shower located in a bathing facility for a single occupant accessed only through a private office, and not for common use or public use...
-
608.5.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
-
608.5.2 Standard Roll-In Type Shower Compartments
In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
-
Takeform Fusion Signage Evacuation Map Type D
Locations: Elevator Stairwell exits Hotel rooms Classrooms Type D 9.5"w x 17.75"h Insert Size: 8.5"w x 14"h...
-
3.1 Canton Tinseltown 15, 4720 Mega Street NW North Canton, Ohio
- In Auditorium 5, the four (4) wheelchair spaces shall be raised six inches in height at their current location....
-
Issue 13: Stub poles
Issue 13: Stub poles Figure 15: APS is located on mast arm pole more than 10 feet outside the crosswalk lines....
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 213.2
Section 213.2 covers scoping requirements in the current ADA Standards for toilet rooms and bathing rooms.
-
603.4 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
603.4 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
604.8.3 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
Bobrick TrimLineSeries ADA Surface-Mounted Hand Dryer B-7128.115V
Durable, 22-gauge galvanized steel with exposed surface, type 304 satin-finish stainless steel cover having #4 satin-finish vertical grain with black plastic trim, automatic sensor, dual...
-
Notify NYC
All registrants are automatically added to this list....
-
Society for Human Resource Management (SHRM)
SHRM chapters are autonomous organizations, so it is not automatic that you will be a member of your local chapter when you join SHRM at the national level, and vice versa....
-
Water Closets [4.16]
Water Closets [4.16] Accessible water closets, including those located in stalls, must comply with the requirements in 4.16....
-
221.9 Stadium Style Movie Theaters
Wheelchair spaces and companion seats shall be located on a riser or cross-aisle in the stadium section that satisfies at least one of the following criteria: (i) It is located within the...
-
Acoustiguide Opus+ Multimedia Guiding System
User-friendly features include the ability to activate location-based content....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-1009.2.3 Clear deck space
The space shall be 36 inches (914 mm) wide minimum and shall extend forward 48 inches (1219 mm) minimum from a line located 12 inches (305 mm) behind the rear edge of the seat....
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
An equilateral triangle, ¼ inch (6.4 mm) thick with edges 12 inches (305 mm) long and a vertex pointing upward, shall be located at entrances to men’s toilet and bathing facilities....
-
11B-1009.2.3 Clear deck space
The space shall be 36 inches (914 mm) wide minimum and shall extend forward 48 inches (1219 mm) minimum from a line located 12 inches (305 mm) behind the rear edge of the seat....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
An equilateral triangle, ¼ inch (6.4 mm) thick with edges 12 inches (305 mm) long and a vertex pointing upward, shall be located at entrances to men’s toilet and bathing facilities....
