Hand: Specify RHR or LHR, not reversible Functions: See trim selection chart Finishes: P28, P13, P35, US26, US26D Strikes: SD36 standard Latchbolt: 1/...
Search Results "Grade 1 Braille"
-
Allegion Falcon 2090 Cross Bar Exit Device
-
R302.7 Surfaces
The surface requirements in R302.7 apply to sidewalks and other pedestrian circulation paths, pedestrian street crossings and at-grade rail crossings, pedestrian overpasses and underpasses...
-
Scenario 9 – Unjustified Different Treatment
His fourth-grade class is going on a field trip to the local aquarium and Ricardo’s father is told that he must chaperone Ricardo on the trip because the teachers will be very busy and cannot...
-
Technical Infeasibility
an accessible stall would violate the plumbing code’s required fixture count); meeting slope requirements on existing developed sites located on steep terrain where necessary re-grading...
-
1015.2 Where required
open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured vertically to the floor or grade...
-
Kohler Primary Elongated Toilet Bowl with Seat
The Primary toilet offers a low bowl height to accommodate users in kindergartens, grade schools, daycare centers and children's wards all while saving water....
-
Allegion Falcon B-Series Mechanical Locks
Our full line of Grade 2 locksets are a perfect replacement for existing locks, or a smart spec in new construction....
-
Corbin Russwin Inc. Access 600 RNE1 Electrified Door Hardware
The Access 600 RNE1 seamlessly integrates a full range of locks into your Wiegand Access Control System – from mortise locks to cylindrical locks and exit devices – all Grade 1 Corbin Russwin...
-
TownSteel MSE-32-DI Classroom Intruder with Indicator on Both Sides Mechanical Mortise
The MS series Classroom Intruder Mortise Lock with Indicator is BHMA A156.13-2012 certified Grade 1, and UL 10C 3-hour rated....
-
Introduction
Figure 1: Pushbutton-integrated APS (Polara) The availability of improved technologies and the adoption of technical standards in the Manual on Uniform Traffic Control Devices (MUTCD)...
-
1.1.9 Effective date of this code
Exceptions: (1) [HCD 1 & HCD 2] Retroactive permits issued in accordance with Health and Safety Code Section 17958.12....
-
11B-219.3 Receivers
per 25 seats over 50 seats1 2 201 to 500 2, plus 1 per 25 seats over 50 seats1 1 per 4 receivers1 501 to 1000...
-
11B-219.3 Receivers
per 25 seats over 50 seats1 2 201 to 500 2, plus 1 per 25 seats over 50 seats1 1 per 4 receivers1 501 to 1000...
-
Cal-Royal Commander Clutch Mechanism COM Series Cylindrical Lockset
DOOR RANGES - 1 3/8" to 1 3/4" thickness doors. BACKSET - 2 3/4" Standard, 2 3/8", 3 3/4" and 5" optional....
-
Cal-Royal NM Series Extra Heavy Duty Mortise Lockset
Features & Specifications: For Doors - 1-3/4" thick Backset - 2-3/4" Lockcase - Heavy gauge zinc chromate steel Front - Heavy gauge steel 8" x 1-1/4" x 3/32"....
-
Priority 3: Toilet Rooms
Word Fillable Form (2.4MB) Word Non-Fillable Form (2.2MB) PDF Non-Fillable Form (0.7MB)
-
TownSteel FCE4010 Cylindrical Lockdown Rigid Trim
The FCE4010 is a standalone electronic function lock that provides a RFID technology with the security afforded by using grade 1 heavy duty cylindrical lockset....
-
TownSteel FCE4020 Cylindrical Lockdown Clutched Trim RFID Cylindrical
The FCE4020 is a standalone electronic function lock that provides a RFID technology with the security afforded by using grade 1 heavy duty cylindrical lockset....
-
Sargent 8888 Reversible Rim Exit Device
Features Non-handed Single and double door applications Devices are ANSI A156.3 - 2001 Grade 1 UL Fire and Panic Listed 7 functions determined by...
-
Sargent 8900 Mortise Lock Exit Device
Concealed single point guarded latching for additional security Single door applications Double door applications with Vertical Rod Devices are ANSI A156.3 - 2008 Grade...
-
Slope: ADA Standard Section 403.3
Section 403.3 covers the current ADA Standards for the slope of walking surfaces that are part of an accessible route.
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
B.6.ii. - If an agency determines that the acquisition of EIT that meets the applicable technical provisions of the Access Board’s standards would impose an undue burden, does it have any remaining obligations under Section 508?
Thus, in the example provided above, alternative means of access for an individual who is blind might mean providing a hard copy description of the information in Braille or providing an...
-
Tax Credits and Deductions
The tax credit can be used to offset the cost of undertaking barrier removal and alterations to improve accessibility; providing accessible formats such as Braille, large print, and audio...
