Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
Search Results "Writing Surface"
-
11B-1002.5 Amusement ride seats designed for transfer
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Alterations
Where play components are altered and the ground surface is not, the ground surface does not have to comply with the ASTM F 1951-99 standard for accessible surfaces unless the cost of providing...
-
11B-809.10.6.2 Slope
The floor surfaces shall be of Carborundum, grit-faced tile or of material providing equivalent slip resistance....
-
11B-809.10.6.2 Slope
The floor surfaces shall be of Carborundum, grit-faced tile or of material providing equivalent slip resistance....
-
What is slip resistance?
In fact, a truly non-slip surface could not be negotiated....
-
5. Conclusions
This study found that surface characteristics, more specifically surface roughness, can have a large impact on the WBVs that WC users are exposed to....
- Lake Ledge Naturalist Audio Description
-
Clearances: ADA Standard Section 403.5
Section 403.5 covers the current ADA Standards for clearances on walking surfaces that are part of an accessible route.
-
11B-505.10.1 Top and bottom extension at ramps
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent ramp run. ...
-
Seat Location: ADA Standard Section 1009.2.2
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
-
11B-505.10.1 Top and bottom extension at ramps
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent ramp run. ...
-
11B-1009.2.2 Seat location
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
-
11B-1009.2.2 Seat location
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
-
Engineered vs. Outside
Figures 15-17 show the vibrations at the seat, footrest and backrest respectively with the engineered and outside surfaces separated....
-
Background
A surface that might be firm and stable in one region of the country may be not firm and not stable in another; a surface that may be firm and stable in July may be not firm and not stable...
-
Section-by-Section Analysis
The Access Board is committed to writing guidelines that are clear, concise, and easy to understand so that persons who use the guidelines know what is required....
-
23. Entire Agreement
promises or oral agreements between the Parties relating to the subject matters of this Settlement Agreement not included or referred to in this Settlement Agreement and not reflected in a writing...
-
G.6.i. - What is the undue burden exception?
If an agency invokes the undue burden exception, it must document in writing the basis for the decision and provide documentation for inclusion in the contract file (see sections G.6.iii...
-
C. ADA COORDINATOR
If the County changes its ADA Coordinator(s), it will notify the United States in writing, and update the name and contact information everywhere it appears, within one (1) day of making...
-
Cognitive/Psychiatric Impairments
After effective accommodations are chosen, employers should decide who will be involved in implementing the evacuation plan, commit the plan to writing and share it with employees for feedback...
-
15(a)
The ADA inspector shall be required to document the results of the surveys in writing and with photographs and shall create a report (the “HWI Hotels Survey Report”)....
-
68.52. Inspections
(c) The owner shall be advised in writing of the results of each inspection....
-
C. ADA COORDINATOR
If the County changes its ADA Coordinator(s), it will notify the United States in writing, and update the name and contact information everywhere it appears, within one (1) day of making...