Surfaces of transfer walls shall not be sharp and shall have rounded edges....
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
1009.4.4 Surface
-
1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
A Wheelchair Rider's Guide to the California Coast
Explore, enjoy, protect. Rolling across the sand in a beach wheelchair Fishing from an accessible pier Hiking an accessible trail or...
-
Chapter 3: Building Blocks
Chapter 3 contains basic technical requirements that form the "building blocks" of accessibility as established by the guidelines....
-
5.4.3 Transfer Support Height for M301 and M302
5.4.3 Transfer Support Height for M301 and M302 Description: Transfer support height applies to the vertical distance that the gripping area of the support is above the transfer surface...
-
Handrails [§504.6, §505]
Handrails [§504.6, §505] Handrails are required on both sides of stairs and must be continuous within the full length of each stair flight. Inside handrails on switchback or...
-
Scope: ADA Standard Section 501.1
Section 501.1 covers scoping requirements in the current ADA Standards for general site and building elements.
-
Designing Sidewalks and Trails for Access, Part II of II: Best Practices Design Guide
Source: U.S. Department of Transportation / Beneficial Designs, Inc. Document: 484 pages (9.30 MB PDF) Publication Date: September 2001 This guidebook is the second part of...
-
Building Entrance
Building entrance requirements are in Section D of the 2016 Checklist found in Part 3 of this document....
-
Building Entrance Checklist
Building Entrance Checklist...
-
D. Building Entrance
Building Entrance...
-
Objective Surface Measurements
Objective Surface Measurements For purposes of comparison, objective surface measurement data are included from the “Measurement of Surface Characteristics for Accessibility” NIH-funded...
-
Requirement 6 -- Reinforced Walls for Grab Bars
[See subsections ...]
-
2010 ADA Standards - Plan Review Tool - Doors
2010 ADA Standards - Plan Review Tool - Doors Click here to view/download the pdf, Page 1 of 2 (258 KB) Click here to view/download the pdf, Page 2 of 2 (264 KB) * * * * * *...
-
California/ADA Plan Review Tool - Door Maneuvering Clearances
California/ADA Plan Review Tool - Door Maneuvering Clearances Click here to view/download the pdf "California/ADA Plan Review Tool - Door Maneuvering Clearances" (250 KB) * * *...
-
Priority 2: Access to Goods & Services
Word Fillable Form (2.5MB) Word Non-Fillable Form (2.4MB) PDF Non-Fillable Form (1.4MB)
-
Section A: Parking
(§502.5) A4 Are designated accessible parking spaces and the access aisles serving them on a level surface, with slopes not exceeding 1:48 in all...
-
California Capital Access Program (CalCAP) Americans With Disabilities Act (ADA) Financing Program
Designed to assist small businesses with financing the costs to alter or retrofit existing facilities to comply with the requirements of the federal Americans With Disabilities Act...
-
1009.7.2 Separation
Exterior walls separating the exterior area of assisted rescue from the interior of the building shall have a minimum fire-resistance rating of 1 hour, rated for exposure to fire from the...
-
Example 1: With Cooking Facilities
With Cooking Facilities An employee break room with fixed or built-in range cooking facilities shall comply with the requirements of 212 and 804 for kitchens and kitchenettes....
-
5.4.3 Transfer Support Height for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
Transfer supports should be positioned 6 inches minimum and 19 inches maximum above the transfer surface....
-
1(1) Building entrance
(1) Building entrance....
