Both slope and cross slope were measured. These guidelines for measurement were deleted from later versions of the standard....
Search Results "Cross Section"
-
Original research for ANSI A117.1 (1957 - 1961)
-
Re: Service Counters
The intent of this section of the code is to provide not only an accessible counter surface for the disabled to utilize, but also to allow a free flow interaction with an employee on the...
-
§ 38.159(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches (32 mm) and 11/2 inches (38 mm) or shall provide an equivalent grasping surface, and have eased edges with corner radii...
-
§ 38.29(b)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
Beach Access Routes
Beach access routes allow pedestrians to cross a beach so that they can play, swim, or participate in other beach- or water-related activities....
-
R302.7.1 Vertical Alignment
Where pedestrian access routes cross rails at grade, the pedestrian access route surface shall be level and flush with the top of rail at the outer edges of the rails, and the surface between...
-
G.12 - May an agency exempt an acquisition from the requirements of Section 508 if such procurement is undertaken to comply with the Government Paperwork Elimination Act (GPEA)?
Agency efforts undertaken to comply with GPEA are not exempt from Section 508....
-
EPL All-Time Best XI & Metrics: A Data-First Evaluation
However, earlier eras lacked granular tracking, making cross-era comparisons imperfect. Distribution adds complexity....
-
§35.150(d)(2)
entity has responsibility or authority over streets, roads, or walkways, its transition plan shall include a schedule for providing curb ramps or other sloped areas where pedestrian walks cross...
-
Managed Use
For example, a trail may be managed for both equestrian and hiker/pedestrian use in the summer and for cross-country skiing in the winter....
-
§ 35.150(d)(2)
entity has responsibility or authority over streets, roads, or walkways, its transition plan shall include a schedule for providing curb ramps or other sloped areas where pedestrian walks cross...
-
California: Toilet Grab Bars - Uneven height allowed?
Grab bars for water closets shall comply with Section 11B-609. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall....
- HEWI System Lignum Multiplex Handrails
-
Section 37.73 Purchase or Lease of Used Non-Rail Vehicles by Public Entities Operating a Fixed Route System
Section 37.73 Purchase or Lease of Used Non-Rail Vehicles by Public Entities Operating a Fixed Route System The basic rule is that an acquisition of a used vehicle would have to be for...
-
2004 ADA and ABA Accessibility Guidelines
The Access Board is also considering additional technical criteria based on the 2004 ADA and ABA Accessibility Guidelines for cross section dimensions and clearances around gripping surfaces...
- AccessRec DuraDeck 2 Molded Plastic Mat Ground Surface
-
Vibrotactile WALK indications
Thus, a pedestrian must be able to stand with a hand on the device while he/she is aligned and waiting to begin crossing....
-
Evaluate and adjust the volume of the Walk indication
It should be audible from the crossing location, but it should not be audible across the street....
-
Water Play Components
the accessible route, clear floor or ground spaces, and turning spaces that connect play components are submerged, the accessible route does not have to comply with the requirements for cross...
-
R302.7.4 Flangeway Gaps
Flangeway gaps at pedestrian at-grade rail crossings shall be 64 mm (2.5 in) maximum on non-freight rail track and 75 mm (3 in) maximum on freight rail track....
-
STREETS, ROADS AND WALKWAYS {35.150}
entity has responsibility or authority over streets, roads, or walkways, its transition plan shall include a schedule for providing curb ramps or other sloped areas where pedestrian walks cross...
-
Shower Spray Unit
However, comments from the plumbing industry indicated that the requirement, as worded, would pose cross connections and thermal shock hazards and would conflict with model codes and industry...