Telecommunications equipment manufacturers shall evaluate the accessibility, usability, and interoperability of ICT during its product design, development, and fabrication....
Search Results "TAS: Texas Accessibility Standards"
-
C201.5 Design, Development, and Fabrication
-
10.3.2(2)
(2) The accessible route required by 10.3.2(1) shall include the features specified in 10.3.1(1), (4)-(9), (11)-(15), and (17)-(19)....
- Supergrit Safety Treads
-
2. IMPROVING PHYSICAL ACCESS
Access issues that should be considered include:...
-
2010 ADA Standards for Accessible Design
2010 ADA Standards for Accessible Design This checklist is based on the 2010 ADA Standards for Accessible Design (2010 Standards)....
- Access Board: Automatic Door Controls
-
4.3.4 Passing Space
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
4.3.4 PASSING SPACE
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
M101.1 Purpose (Section-by-Section Analysis)
The MDE NPRM proposed that the purpose of the MDE Standards was to establish technical criteria for diagnostic equipment that is accessible to and usable by patients with disabilities and...
-
4. Pressure Gauge
In general, if the operation of a door, a faucet, or other device requires more than 5 pounds of force, it is not accessible to many people with disabilities....
- Access Board: Accessible Bathing Facilities Scoping
-
K. Ambulatory Stall
If there are more than 5 stalls in any restroom, is there one stall in addition to the large accessible stall, that is 36" wide, has 2 parallel grab bars at 33"-36" off the floor and has...
-
233.3.3 Additions
Residential dwelling units required to comply with 233.3.1.1 shall be on an accessible route as required by 206....
-
604.8.1.7 Water closet
In new construction, the accessible water closet within the wheelchair accessible compartment shall be located in the corner, diagonal to the door....
-
233.3.3 Additions
Residential dwelling units required to comply with 233.3.1.1 shall be on an accessible route as required by 206....
- Businesses Inspected by a CASp - from DSA
-
11B-411.2.1.5 Button requirements
Keypad buttons, the accessibility function button, and additional hall call console buttons shall comply with Section 11B-411.2.1.5....
-
11B-411.2.1.5 Button requirements
Keypad buttons, the accessibility function button, and additional hall call console buttons shall comply with Section 11B-411.2.1.5....
-
3 [§ 4.3.7]
The cross slope of a curb ramp, or any accessible route, may not exceed 2 percent....
-
A. Statutory and rulemaking history
A, contains the ADA Standards for Accessible Design....
-
Passenger Loading Zones
Where passenger loading zones are provided, the 1991 Standards, at sections 4.1.2(5) and 4.6.6, require at least one passenger loading zone to be accessible....
-
Ensuring Online Files and Documents are Accessible
The following sites and tools can help you create and maintain accessible web-based material: The American Council of the Blind’s publication, A Guide to Making Documents Accessible...
-
Gates, Bars, and Berms
Forest Service-constructed barriers on pedestrian travel routes must have a 32-inch minimum width gap or include a route beside them that will permit passage of a wheelchair....