A clear floor space complying with Section 11B-305 positioned for a forward approach shall be provided. Knee and toe clearance complying with Section 11B-306 shall be provided....
Search Results "Seating Space"
Filters
Commonly Searched Documents
-
11B-902.2 Clear floor or ground space
-
11B-902.2 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for a forward approach shall be provided. Knee and toe clearance complying with Section 11B-306 shall be provided....
-
11B-902.2 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for a forward approach shall be provided. Knee and toe clearance complying with Section 11B-306 shall be provided....
-
T304.3 Location
Operable parts provided at a wheelchair space shall be located adjacent to the wheelchair space 24 inches (610 mm) minimum and 36 inches (915 mm) maximum from the rear of the wheelchair...
-
Clear Floor and Turning Space Inside Examination Rooms
The minimum amount of space required is 30 inches by 48 inches. Clear floor space is needed along at least one side of an adjustable height examination table....
-
Caroma® USA Somerton Smart 270 Easy Height Elongated Toilet
to 19” (430 to 485mm) measured to the top of the toilet seat....
-
Caroma® USA Sydney Low Profile 270 Easy Height Elongated Toilet
19" (430 to 485mm) measured to the top of the toilet seat....
-
1015.5 Surface
The surface of clear ground spaces and turning spaces shall be firm and stable....
-
1015.5 Surface
The surface of clear ground spaces and turning spaces shall be firm and stable....
-
1002.4.4.2 Side Entry
The amount of clear space needed within the ride, and the size and position of the opening are interrelated....
-
1002.4.4.2 Side Entry
The amount of clear space needed within the ride, and the size and position of the opening are interrelated....
-
4.34.2(2)
(2) Accessible spaces shall have maneuvering space complying with 4.2.2 and 4.2.3 and surfaces complying with 4.5....
-
Clearances Around Gripping Surfaces
The 2004 ADA and ABA Accessibility Guidelines specify the following clearances around grab bars to ensure sufficient space for a person to grasp the grab bar: 1½ inches absolute clearance...
-
R404.6 Approach
One full unobstructed side of a clear space shall adjoin a pedestrian access route or adjoin another clear space....
-
11B-805.4.2 Equipment
Clear space complying with Section 11B-305.2 shall be provided as required for specific equipment....
-
4.1.6 Surface
The surface of the clear floor or ground space shall be firm and stable. The type of surface should be appropriate to the setting and level of development. ...
-
Performance Areas
Performance Areas An accessible route must connect stages and other performance areas directly to seating areas where they are directly connected by a circulation path as well as to...
-
Width: ADA Standard Section 502.3.1
Section 502.3.1 covers the current ADA Standards for the required width of access aisles.
-
11B-502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1524 mm) wide minimum....
-
6.3(3)
(3) Each bedroom shall have adequate space to provide a minimum clear floor space of 36 in (915 mm) along each side of the bed and to provide an accessible route complying with 4.3.3 to...
-
4.6.6 Surface
The surface of the clear floor or ground space required by section 4.6.4 shall be firm and stable. The type of surface should be appropriate to the setting and level of development. ...
-
Access Board: Clear Floor or Ground Space
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Transfer Surface Height (M301.2.1 and M302.2.1)
For many patients who use mobility devices, independent transfer is possible only if the height of the transfer surface is at or near the seat height of their mobility device....
-
Technical Memorandum TM 2013-12 Number of Accessible Elements and Spaces
TM 2013-12 Number of Accessible Elements and Spaces Effective Date: June 1, 2013 2012 TAS Reference: 201.1 In accordance with TAS 201.1, the standards must be applied to...
