The Department is aware that the proposed rule may represent a significant change in practice for many public entities with respect to "secondary market" ticket sales. ...
Search Results "Practice Teeing Ground"
-
Secondary market ticket sales. (Section-by-Section Analysis)
-
Exterior/ Fire Doors
Research sponsored by the Board ("Automated Doors" by Adaptive Environments Laboratory (1993) indicates that a force of 15 lb is probably the most practicable as a specified maximum....
-
Website Accessibility Coordinator
of this Agreement; A contact person for Content Providers on accessibility issues relating to www.edx.org, its mobile applications, the Platform, and the Accessibility Best Practices...
-
Priority 1: Approach & Entrance
Word Fillable Form (1.5MB) Word Non-Fillable Form (1.3MB) PDF Non-Fillable Form (0.8MB)
-
241 and 612 Saunas and Steam Rooms
Doors are not permitted to swing into the clear floor or ground space for the accessible bench....
-
Seat Heights
Seat Heights: Transfer platforms in play areas need to be between 11 and 18 inches maximum above the ground (ADA-ABA Section 1008.3.1.2)[7]....
-
Gamco Welded Frame Mirrors - A-Series
Corners are welded and ground smooth. Back Panel - fabricated of galvanized steel with tab lock and snap lock design slots formed to receive wall hanger tabs....
-
CHG Hospital Beds Spirit Select
Spirit Select is loaded with regular hospital bed features, and it has the ability to go lower to the ground than any other hospital bed on the market....
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
612.2 Bench
EXCEPTION: A readily removable bench shall be permitted to obstruct the turning space required by 612.3 and the clear floor or ground space required by 903.2....
-
Use Zone
The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 (incorporated by reference, see "Referenced Standards" in Chapter...
-
Turning Space
The space may overlap the accessible route and clear floor or ground space....
-
904.4.2 Forward Approach
A clear floor or ground space complying with 305 shall be positioned for a forward approach to the counter....
-
904.4.2 Forward Approach
A clear floor or ground space complying with 305 shall be positioned for a forward approach to the counter....
-
612.2 Bench
EXCEPTION: A readily removable bench shall be permitted to obstruct the turning space required by 612.3 and the clear floor or ground space required by 903.2....
-
106.5.74 Use Zone
The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 (incorporated by reference, see "Referenced Standards" in Chapter...
-
Are accessible spaces required in temporary parking lots and in unpaved lots, such as gravel or grass lots?
In all parking facilities, including gravel or grass lots, parking spaces and access aisles must be marked and have firm, stable, and slip resistant surfaces as specified for accessible ground...
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
11B.707.7.1.1 Vertically mounted display screen
vertically or tipped away from the viewer less than 30 degrees, the center line of the display screen and other display devices shall be no more than 52 inches (1321 mm) above the floor or ground...
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
Reach Ranges and Operability Requirements
If the obstruction is more than 20 inches (510 millimeters) deep, the object to be reached must be between the top of the obstruction and 44 inches (1,120 millimeters) above the ground or...
-
2010 ADA Standards
It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
104.1.1 Construction and Manufacturing Tolerances
It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
104.1.1 Construction and Manufacturing Tolerances
It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
