226 Dining Surfaces and Work Surfaces
Search Results "Table Height"
Filters
Commonly Searched Documents
-
226 Dining Surfaces and Work Surfaces
-
11B-226 Dining surfaces and work surfaces.
[See subsections ...]
-
11B-902 Dining surfaces and work surfaces
[See subsections ...]
-
11B-902 Dining surfaces and work surfaces
[See subsections ...]
-
11B-226 Dining surfaces and work surfaces
[See subsections ...]
-
4.1.3(18)
(18) If fixed or built-in seating or tables (including, but not limited to, study carrels and student laboratory stations), are provided in accessible public or common use areas, at least...
-
11B-606.3 Height
ETA Editor's Note Top-mounted sinks installed in counters having the top surface 34 inches above the floor will exceed the maximum rim height allowed, regardless of how thin the flange...
-
11B-606.3 Height
ETA Editor's Note Top-mounted sinks installed in counters having the top surface 34 inches above the floor will exceed the maximum rim height allowed, regardless of how thin the flange...
-
4.1.2 Surface Design of Examination Tables and Chairs
4.1.2 Surface Design of Examination Tables and Chairs For several reasons including patient comfort and safety, the surfaces of many examination tables and chairs are not flat....
-
11B-1008.4.3 Play tables
Where play tables are provided, knee clearance 24 inches (610 mm) high minimum, 17 inches deep (432 mm) minimum, and 30 inches (762 mm) wide minimum shall be provided....
-
11B-1008.4.3 Play tables
Where play tables are provided, knee clearance 24 inches (610 mm) high minimum, 17 inches deep (432 mm) minimum, and 30 inches (762 mm) wide minimum shall be provided....
-
11B-1008.4.3 Play tables
Where play tables are provided, knee clearance 24 inches (610 mm) high minimum, 17 inches deep (432 mm) minimum, and 30 inches (762 mm) wide minimum shall be provided....
-
4.1.2(17)
(17) If fixed or built-in seating, tables, or work surfaces are provided in accessible spaces, at least 5 percent, but always at least one, of seating spaces, tables, or work surfaces shall...
-
1009.2.4 Seat Height
1009.2.4 Seat Height....
-
§ 38.25(c) Door height
(c) Door height....
-
Height Above Finish Floor or Ground: ADA Standard Section 703.4.1
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...
-
5.2.1.1 Transfer Surface Width Recommendations for M301
This allowed members to experience tables that were 28 inches wide along with the other elements of the equipment....
-
KirbyBuilt Providence Picnic Table with Maximum Seating
Intimate 6’ table accommodates up to seven people and one wheelchair guest. Tabletop & Seats: Plastic - injection molded, ribbed and reinforced Tabletop Length: 6 ft....
-
Character Height [4.30.3]
Character Height [4.30.3] Characters must be sized according to the viewing distance although a minimum 3 inch upper case or capital letter height is required for overhead signs (i.e....
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Pilot Rock WPTS Square Frame Table Using Lumber
These tables have a square frame which provides the look of a pedestal table but are portable for site flexibility....
-
Pilot Rock PQT3-4 Square Pedestal Table Using Lumber
, an ideal game or craft table, good for children or adults. ...
-
902.3 Baby Changing Table Work Surface Height
-
Pilot Rock WXT and WXTH Picnic Table Using Lumber
Specifications: Model WXT and WXTH Picnic Tables utilize a patented innovative design evolution of our popular XT Series Park Tables. ...
