Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
Search Results "Recreational Surfacing"
Commonly Searched Documents
-
404.2.10 Door and Gate Surfaces
-
4.1.6 Surface
The surface of the clear floor or ground space shall be firm and stable. The type of surface should be appropriate to the setting and level of development. ...
-
4.6.6 Surface
The surface of the clear floor or ground space required by section 4.6.4 shall be firm and stable. The type of surface should be appropriate to the setting and level of development. ...
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1012.2 Recreational Vehicles
This section requires parking spaces and pull-up spaces for recreational vehicles to be 20 feet wide minimum to accommodate recreational vehicles equipped with a lift....
-
R407.7 Surfaces
R407.7 Surfaces. Surfaces of ramp runs and landings shall comply with R302.7....
-
802.1.1 Floor or Ground Surface
802.1.1 Floor or Ground Surface. The floor or ground surface of wheelchair spaces shall comply with 302. Changes in level are not permitted....
-
Smooth Surface
Section 404.2.10 requires that swinging doors and gates have a smooth surface on the push side that extends their full width....
-
5.1.7 Surface
The surface of the clear ground space shall be firm and stable....
-
11B-302.3 Openings
Openings in floor or ground surfaces shall not allow passage of a sphere more than ½ inch (12.7 mm) diameter except as allowed in Sections 11B-407.4.3, 11B-409.4.3, 11B-410.4, 11B-810.5.3...
-
F245.4 Outdoor Recreation Access Routes
Picnic facilities shall provide outdoor recreation access routes complying with 1016 in accordance with F245.4. Advisory F245.4. Outdoor Recreation Access Routes....
-
4.3.4 Tent Pad or Platform Surface
Tent pads and platforms shall have a surface that is firm and stable and is designed to allow use of tent stakes and other tent securing devices. Exception....
- Envirobond Organic-Lock™ Surface Stabilizer
-
810.2.1 Surface
810.2.1 Surface. Bus stop boarding and alighting areas shall have a firm, stable surface....
-
F246.4 Outdoor Recreation Access Routes
At least one outdoor recreation access route complying with 1016 shall connect accessible parking spaces or other arrival points serving the viewing area with accessible elements, spaces...
-
2.0 OUTDOOR RECREATION ACCESS ROUTES (ORARS)
[See subsections ...]
-
4.4.6 Surface
The surface of the clear floor or ground space for benches shall be firm and stable. The type of surface should be appropriate to the setting and level of development....
-
Surface
The top layer of a trail.
-
4.4.1 General
At least 20 percent of the benches provided at a recreation site shall be connected to an ORAR complying with section 2.0. Exception 1....
-
1012.2 Recreational Vehicles
Parking spaces and pull-up spaces for recreational vehicles shall be 20 feet (6100 mm) wide minimum....
-
1012.2 Recreational Vehicles
Parking spaces and pull-up spaces for recreational vehicles shall be 20 feet (6100 mm) wide minimum....
-
802.1.1 Floor or Ground Surface
The floor or ground surface of wheelchair spaces shall comply with 302. Changes in level are not permitted. EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
802.1.1 Floor or Ground Surface
The floor or ground surface of wheelchair spaces shall comply with 302. Changes in level are not permitted. EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
Surface, Slope, and Openings [1011.2.2, 1011.2.3, and 1011.2.4]
The surface of the clear ground space must be firm and stable. Additional information on firm and stable surfaces is provided in the trails section of this guide....