U-shaped kitchens, designed with parallel approach at a range or cooktop located at the base of the U, shall have a minimum clear width of at least 60 inches (1524 mm)....
Search Results "Driving Range"
Filters
Commonly Searched Documents
-
1133A.2.1, Item 1
-
1133A.2.1, Item 1
U-shaped kitchens, designed with parallel approach at a range or cooktop located at the base of the U, shall have a minimum clear width of at least 60 inches (1524 mm)....
-
Accessible Route Guidelines
Accessible Route Guidelines Where an accessible route is used, the golf course guidelines modify ADAAG’s accessible route provisions. They increase the minimum width for an...
-
Vending Machines and Other Equipment [5.8]
Recommendation: It is recommended that the operable portions be within accessible reach ranges....
-
Salad Bars and Buffet Counters
Salad Bars and Buffet Counters Recommendations: The standard reach range should be considered in the design of built-in salad bars although not all portions are required to be within...
-
Door King Inc. 1520/1524 Stand Alone Card Readers
The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader (DK Prox, AWID or HID) or...
-
Figure 308.2.2 Obstructed High Forward Reach – Drawing from the U.S. Access Board
-
Figure 308.2.1 Unobstructed Forward Reach – Drawing from the U.S. Access Board
-
Reach Ranges
Reach Ranges. The 1991 Standards set the maximum height for side reach at 54 inches above the floor....
-
H13
H13. Is the operating control (switch, lever, button, or pull) of at least one of each type of dispenser or built-in equipment no higher than 54 inches above the floor (if there is...
-
I1a
I1a. For a side approach (clear floor space at least 30 inches long x 48 inches wide), is the coin slot no higher than 54 inches above the floor? [ADA Standards § 4.31.2, Fig. 44...
-
M14
M14. Is the operating control (switch, lever, button, or pull) for each type of dispenser or built-in equipment no higher than 54 inches above the floor (if there is clear floor...
-
8.4 Card Catalogs and Magazine Displays
Minimum clear aisle space at card catalogs and magazine displays shall comply with Fig. 55. Maximum reach height shall comply with 4.2, with a height of 48 in (1220 mm) preferred...
-
8.4 CARD CATALOGS
Minimum clear aisle space at card catalogs, magazine displays, or reference stacks shall comply with Fig. 55. Maximum reach height shall comply with 4.2, with a height of 48 in (1370...
-
A4.31.3 MOUNTING HEIGHT
In localities where the dial-tone first system is in operation, calls can be placed at a coin telephone through the operator without inserting coins. The operator button is located...
-
4.27.3* HEIGHT
The highest operable part of all controls, dispensers, receptacles, and other operable equipment shall be placed within at least one of the reach ranges specified in 4.2.5 and 4.2.6....
-
1008.4.2 Clear Floor or Ground Space
When designing play components with manipulative or interactive features, consider appropriate reach ranges for children seated in wheelchairs....
-
1008.4.2 Clear Floor or Ground Space
When designing play components with manipulative or interactive features, consider appropriate reach ranges for children seated in wheelchairs....
-
Obstructed High Reach: ADA Standard Section 308.3.2
Section 308.3.2 covers the current ADA Standards for obstructed high side reach.
-
11B-308.3.2 Obstructed high reach
Where a clear floor or ground space allows a parallel approach to an element and the high side reach is over an obstruction, the height of the obstruction shall be 34 inches (864 mm)...
-
1011.3 Operable Parts
technical requirements for the height of operable parts in 309.3 of the Architectural Barriers Act Accessibility Guidelines, which require operable parts to be placed within the reach ranges...
-
T504 Fare Collection Devices
The Access Board believes such concerns are misplaced, and has not modified the specified height range for operable parts on fare collection devices (or any other devices)....
-
F104.1 Dimensions
Dimensions that are not stated as "maximum" or "minimum" are absolute.
