432 mm) Grab Bar Height 18 to 20 inches (457 to 508 mm) 20 to 25 inches (508 to 635 mm) 25 to 27 inches (635 to 686 mm) Dispenser...
Search Results "Dispenser Location"
Filters
Commonly Searched Documents
-
11B-604.9 Water closets and toilet compartments for children's use
-
T505.3 Location of Operable Parts
Operable parts shall be located so that they are reachable by passengers using wheelchair when parked in a clear space 30 inches (760 mm) wide minimum and 48 inches (1220 mm) long minimum...
-
Georgia-Pacific enMotion® Recessed Automated Touchless Towel Dispenser Demonstration Video
-
Location [§208.3]
Location [§208.3] Where parking serves multiple entrances to a facility, accessible spaces must be dispersed among accessible entrances....
-
Bobrick ConturaSeries Recessed Paper Towel Dispenser and Waste Receptacle B-43944 Informational Video
Bobrick ConturaSeries Recessed Paper Towel Dispenser and Waste Receptacle B-43944 Informational Video...
-
604.7 Open Type Toilet Paper Dispenser Height
-
Figure 602.5 Drinking Fountain Spout Location – Drawing from the U.S. Access Board
-
§104.4(b)(5)
(5) In determining the site or location of a facility, an applicant for assistance or a recipient may not make selections...
-
§ 38.29(a)
(a) Interior handrails and stanchions shall permit sufficient turning and maneuvering space for wheelchairs and other mobility aids to reach a securement location from the lift or ramp....
-
11B-208.3.1 General
Parking spaces complying with Section 11B-502 that serve a particular building or facility shall be located on the shortest accessible route from parking to an entrance complying with Section...
-
5.3.3.2 Location Where Walls Provided
Where walls or partitions are provided, the seat shall be positioned with a wall or partition to the rear and to one side of the seat for a left-hand or right-hand approach. The back...
-
General: ADA Standard Section 208.3.1
Section 208.3.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for parking space locations.
-
Water Flow: ADA Standard Section 602.6
Section 602.6 covers the current ADA Standards for the drinking fountain water flow.
-
11B-812.7.1 Location
aisles at vehicle spaces shall not overlap the vehicular way and may be placed on either side of the vehicle space they serve except for van accessible spaces which shall have access aisles located...
-
11B-602.6 Water flow
The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit....
-
604.5.2 Rear Wall Grab Bar Location
This video demonstrates how to take the measurements of the length of a rear grab bar and the lateral position of a rear grab bar.
-
11B-604.5.1 Side wall
The side wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with...
-
T213.1 General
Seats on non-rail vehicles shall comply with T213.
-
Number and Location: ADA Standard Section 221.2.1
Section 221.2.1 covers scoping requirements in the current ADA Standards for the number and location of wheelchair spaces.
-
Entry Points and Seats
When play components are located on an accessible route, the height required to transfer directly to the entry point or seat of a play component has a minimum of 11 inches (280 mm) and a...
-
Figure 1009.5.7 Grab Bars – Drawing from the U.S. Access Board
-
Figure 1009.4.5 Grab Bars for Transfer Walls – Drawing from the U.S. Access Board
-
11B-812.7.1 Location
aisles at vehicle spaces shall not overlap the vehicular way and may be placed on either side of the vehicle space they serve except for van accessible spaces which shall have access aisles located...
