ASTM E1155 and ASTM E1486 do prescribe the methods for determining floor flatness and waviness using the F - number system and waviness index, but these standards are not mandated for testing...
Search Results "Individual Building Test"
-
Some existing measurement protocols
-
Background
Background A new edition of the California Building Code is issued every three years, based on the International Building Code (IBC) dated the previous year, liberally modified. ...
-
Grab Bar and Backrest Evaluation
found in Addendum D [Note that Addendum D was a preliminary analysis that was done before completion of the phase 2 study and thus contain a subset of the total numbers of participants tested...
-
ENTRANCE
[DSA-AC] Any access point to a building or portion of a building or facility used for the purpose of entering....
-
IX. New Construction
All newly constructed places of public accommodation and commercial facilities must be accessible to individuals with disabilities to the extent that it is not structurally impracticable...
-
405.2 Slope
EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are necessary due...
-
405.2 Slope
EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are necessary due...
-
405.2 Slope
EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are necessary due...
-
D. STRUCTURAL MODIFICATIONS
With respect to the Townhouse, the Police Station, the Highway Garage Building, the Lewisboro Library and the Community House at Goldens Bridge, at Cross River, and at Vista (collectively...
-
Observations and Results
Impact Attenuation Impact testing (ASTM F1292, ASTM 1999)) of the Vitri Turf and Soil-Sement surfaces was conducted 8 weeks after installation (Fig. 13)....
-
ASME
ASME A17.1 is used by local jurisdictions throughout the United States for the design, construction, installation, operation, inspection, testing, maintenance, alteration, and repair of...
-
11B-703.1.1 Plan review and inspection
Signs as specified in Section 11B-703, or in other sections of this code, when included in the construction of new buildings or facilities, or when included, altered or replaced due to additions...
-
11B-206.5.1 Entrances
Each entrance to a building or facility required to comply with Section 11B-206.4 shall comply with Section 11B-404. [2010 ADA Standards] 206.5.1 Entrances....
-
11B-206.5.1 Entrances
Each entrance to a building or facility required to comply with Section 11B-206.4 shall comply with Section 11B-404. [2010 ADA Standards] 206.5.1 Entrances....
-
11B-703.1.1 Plan review and inspection
Signs as specified in Section 11B-703, or in other sections of this code, when included in the construction of new buildings or facilities, or when included, altered or replaced due to additions...
-
1.1.6 Nonbuilding standards, orders and regulations
Requirements contained in the California Building Code, or in any other referenced standard, code or document, which are not building standards as defined in Health and Safety Code Section...
-
TTYs: ADA Standard Section 217.4
Section 217.4 covers scoping requirements in the current ADA Standards for TTYs.
-
1009.2.1 Elevators required
In buildings where a required accessible floor or occupied roof is four or more stories above or below a level of exit discharge, not less than one required accessible means of egress shall...
-
711.3.1.2 Through-penetration firestop system
Through penetrations shall be protected by an approved penetration firestop system installed as tested in accordance with ASTM E 814, with a minimum positive pressure differential of 0.01...
-
711.4.6 Floor fire doors
Floor fire doors used to protect openings in fire-resistance-rated floors shall be tested in the horizontal position in accordance with ASTM E 119, and shall achieve a fire-resistance rating...
-
§104.42(d) Validity studies
grades, but shall conduct periodic validity studies against the criterion of overall success in the education program or activity in question in order to monitor the general validity of the test...
-
III-7.3110 Work areas
Access to work areas, but not to individual work stations, is required....
-
§1607.12 Retesting of applicants.
Where examinations are administered periodically with public notice, such reasonable opportunity exists, unless persons who have previously been tested are precluded from retesting....
-
BEA Inc. Indoor & Outdoor Door Entry Keypads
These keypads are designed for basic access or code control for up to four individual devices....
