The surface of the clear ground space shall be firm and stable....
Search Results "Clear Floor Area"
Filters
Commonly Searched Documents
-
1014.2.1.1.1 Surface
-
1014.2.1.1.1 Surface
The surface of the clear ground space shall be firm and stable....
-
F245.4.2 Routes to and within Common Use and Public Use Areas
This section requires at least one outdoor recreation access route to connect each picnic unit with mobility features with common use and public use areas serving the unit; and at least...
-
A. Passenger Drop-Off Areas
Passenger Drop-Off Areas During an evacuation the most efficient method of transporting people to shelters likely will include using vans and buses....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
4.3.11.1(7)
Such pressurization system shall be activated by smoke detectors on each floor located in a manner approved by the appropriate local authority....
-
Doors [9.2.2(3), 9.4]
Because of the social interaction and visitation that often occurs in lodging facilities, an accessible door clear opening width (32 inches minimum) is required to and within all sleeping...
-
Notification: ADA Standard Section 809.5.5.1
Where visible doorbell signals are located in sleeping areas, they shall have controls to deactivate the signal....
-
11B-809.5.5.1 Notification
Where visible doorbell signals are located in sleeping areas, they shall have controls to deactivate the signal....
-
4.3.11.4* Two-way Communication
A method of two-way communication, with both visible and audible signals, shall be provided between each area of rescue assistance and the primary entry....
-
§ 38.29(e)
front-door lifts or ramps, vertical stanchions immediately behind the driver shall either terminate at the lower edge of the aisle-facing seats, if applicable, or be “dog-legged” so that the floor...
-
4.34.5.4 BATHTUBS
If a bathtub is provided, then it shall have the following features:
-
1015.5 Surface
This section requires the surface of the clear ground space and turning space to be firm and stable....
-
11B-221.2.1 Number and location
Wheelchair spaces shall be provided complying with Section 11B-221.2.1.
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
11B-1008.2.5.3.2 Handrail height
The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.
-
F221.2.1 Number and Location
Wheelchair spaces shall be provided complying with F221.2.1.
-
11B-246.2 Camping facilities
In camping facilities where campsites are provided, at least two campsites and one additional campsite for each 100 campsites or fraction thereof, shall be accessed by and connected...
-
POLLING PLACE ACCESSIBILITY IS REQUIRED BY THE AMERICANS WITH DISABILITIES ACT
The Americans with Disabilities Act (ADA) is a federal civil rights law that provides protections to people with disabilities to ensure that they are treated equally in all aspects...
-
1008.2.6.1 Accessibility
1008.2.6.1 Accessibility. Ground surfaces shall comply with ASTM F 1951 (incorporated by reference, see "Referenced Standards" in Chapter 1). Ground surfaces shall be inspected and...
-
1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951 (incorporated by reference, see "Referenced Standards" in Chapter 1). Ground surfaces shall be inspected and maintained regularly and...